2014 Ram C/V Tradesman Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2014 Ram C/V Tradesman, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x127 (5x5") |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 71.5 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
2014 C/V Tradesman — Year-Specific Fitment Context
The 2014 Ram C/V Tradesman is in year 2 of 3 using the 5x127 pattern (2013–2015). Wheels from any 2013–2015 Ram C/V Tradesman are cross-compatible with the 2014 model.
Ram C/V Tradesman Bolt Pattern by Year
The table below shows how the C/V Tradesman's wheel specifications have changed over the years. The 2014 model year is highlighted.
Fitment Notes
The 2014 Ram C/V Tradesman has a bolt pattern of 5x127.
Imperial Conversion: This bolt pattern is commonly referred to as 5x5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x5".
This means it is a 5 lug pattern with a circle diameter of 127mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Ram C/V Tradesman appears from 2013 to 2015 (3 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 80.0 mm
5x127 Pattern Context
This bolt pattern appears on 236 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x127:
2014 Ram C/V Tradesman — Frequently Asked Questions
What is the bolt pattern for a 2014 Ram C/V Tradesman?
The 2014 Ram C/V Tradesman uses a 5x127 bolt pattern (also called lug pattern or PCD). The center bore is 71.5mm and the offset is 35-45mmmm.
What other years of Ram C/V Tradesman have the same bolt pattern as the 2014?
The Ram C/V Tradesman uses the 5x127 pattern from 2013 through 2015. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2014 Ram C/V Tradesman?
Refer to your owner's manual for exact specs, but always tighten the M12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Why is matching the 71.5mm center bore important for the 2014 C/V Tradesman?
The 71.5mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What does 35-45mmmm offset mean for the 2014 C/V Tradesman?
An offset of 35-45mmmm means the wheel's mounting surface is 35-45mmmm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ram.
Do 2014 Ram C/V Tradesmans use lug bolts or lug nuts?
The 2014 C/V Tradesman requires M12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Ram C/V Tradesman is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2013-2015 (3 model years).
- Observed bolt-pattern variants: 1 (5x127).
- Observed total offset span across years: 80.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2014 Ram C/V Tradesman, please report it via our About page contact so we can verify and update this record.