2016 Ram ProMaster Cargo Van Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2016 Ram ProMaster Cargo Van, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x130 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 78.1 mm |
| Offset (ET) | 60 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2016 ProMaster Cargo Van — Year-Specific Fitment Context
The 2016 Ram ProMaster Cargo Van is in year 2 of 10 using the 5x130 pattern (2015–2024). Wheels from any 2015–2024 Ram ProMaster Cargo Van are cross-compatible with the 2016 model.
Ram ProMaster Cargo Van Bolt Pattern by Year
The table below shows how the ProMaster Cargo Van's wheel specifications have changed over the years. The 2016 model year is highlighted.
5x130 Pattern Context
This bolt pattern appears on 208 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x130:
Expert Buying Guide for 2016 Ram ProMaster Cargo Van
For your 2016 Ram ProMaster Cargo Van, the 5x130 bolt pattern and 78.1mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 78.1mm or more); use hub-centric rings to prevent vibration and ensure proper load transfer. The offset is sensitive: stock is 60mm. Deviating more than ±10mm can cause rubbing or bearing stress. Always verify lug nut thread pitch (14x1.5) and seat type—use conical (60-degree) seat nuts unless wheels specify ball seat. Improper seating can lead to wheel loss. Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Ram ProMaster Cargo Van appears from 2015 to 2024 (10 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140-150 ft-lbs after 50 miles of driving.
- ✅ Avoid spacers without extended studs; they can reduce thread engagement.
- ✅ Check for caliper clearance when using wheels with offset below 50mm.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2016 Ram ProMaster Cargo Van — Frequently Asked Questions
What is the bolt pattern for a 2016 Ram ProMaster Cargo Van?
The 2016 Ram ProMaster Cargo Van uses a 5x130 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 60mm.
What other years of Ram ProMaster Cargo Van have the same bolt pattern as the 2016?
The Ram ProMaster Cargo Van uses the 5x130 pattern from 2015 through 2024. Wheels from any of these model years are dimensionally compatible with the 2016, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2016 Ram ProMaster Cargo Van?
Absolutely. Just ensure the aftermarket wheels have a 5x130 bolt pattern, an offset near 60mm, and a center bore of at least 78.1mm (using hub rings if larger).
What is the center bore of a 2016 Ram ProMaster Cargo Van?
The factory center bore (hub bore) for the 2016 Ram ProMaster Cargo Van is 78.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 2016 Ram ProMaster Cargo Van?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the factory wheel offset for a 2016 Ram ProMaster Cargo Van?
The OEM offset for the 2016 ProMaster Cargo Van is typically around 60mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset