2020 Ram ProMaster Cargo Van Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Ram ProMaster Cargo Van, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x130 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 78.1 mm |
| Offset (ET) | 60 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2020 ProMaster Cargo Van — Year-Specific Fitment Context
The 2020 Ram ProMaster Cargo Van is in year 6 of 10 using the 5x130 pattern (2015–2024). Wheels from any 2015–2024 Ram ProMaster Cargo Van are cross-compatible with the 2020 model.
Ram ProMaster Cargo Van Bolt Pattern by Year
The table below shows how the ProMaster Cargo Van's wheel specifications have changed over the years. The 2020 model year is highlighted.
5x130 Pattern Context
This bolt pattern appears on 208 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x130:
Expert Buying Guide for 2020 Ram ProMaster Cargo Van
The 2020 Ram ProMaster Cargo Van uses a 5x130 bolt pattern with a 78.1mm center bore and 60mm offset. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration and ensure proper load distribution. The offset is sensitive; deviations from 60mm may cause rubbing or clearance issues. Always verify lug nut compatibility: 14x1.5 thread pitch with conical (60-degree) seat. Using incorrect lug nuts can lead to wheel detachment. For safety, re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Ram ProMaster Cargo Van appears from 2015 to 2024 (10 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lbs after 50 miles of driving.
- ✅ Avoid wheels with offset below 50mm or above 70mm to prevent rubbing or clearance issues.
- ✅ Always use hub-centric rings if aftermarket wheels have a larger center bore than 78.1mm.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2020 Ram ProMaster Cargo Van — Frequently Asked Questions
What is the bolt pattern for a 2020 Ram ProMaster Cargo Van?
The 2020 Ram ProMaster Cargo Van uses a 5x130 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 60mm.
What other years of Ram ProMaster Cargo Van have the same bolt pattern as the 2020?
The Ram ProMaster Cargo Van uses the 5x130 pattern from 2015 through 2024. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
What is the PCD for a 2020 Ram ProMaster Cargo Van?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2020 ProMaster Cargo Van, the PCD is 5x130.
Will wheels from another Ram fit my 2020 ProMaster Cargo Van?
Only if they share the exact same 5x130 bolt pattern, a compatible offset, and a center bore equal to or larger than 78.1mm.
What is the factory wheel offset for a 2020 Ram ProMaster Cargo Van?
The OEM offset for the 2020 ProMaster Cargo Van is typically around 60mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I put aftermarket wheels on my 2020 Ram ProMaster Cargo Van?
Absolutely. Just ensure the aftermarket wheels have a 5x130 bolt pattern, an offset near 60mm, and a center bore of at least 78.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset