2019 Ram ProMaster Cargo Van Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Ram ProMaster Cargo Van, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x130 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 78.1 mm |
| Offset (ET) | 60 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2019 ProMaster Cargo Van — Year-Specific Fitment Context
The 2019 Ram ProMaster Cargo Van is in year 5 of 10 using the 5x130 pattern (2015–2024). Wheels from any 2015–2024 Ram ProMaster Cargo Van are cross-compatible with the 2019 model.
Ram ProMaster Cargo Van Bolt Pattern by Year
The table below shows how the ProMaster Cargo Van's wheel specifications have changed over the years. The 2019 model year is highlighted.
5x130 Pattern Context
This bolt pattern appears on 208 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x130:
Expert Buying Guide for 2019 Ram ProMaster Cargo Van
For your 2019 Ram ProMaster Cargo Van, the 5x130 bolt pattern and 78.1mm center bore are critical. Aftermarket wheels must have a bore ≥78.1mm; use hub-centric rings to prevent vibration and ensure load is on the hub, not lug nuts. The 60mm offset is sensitive—deviations affect scrub radius and clearance. Stick to 55–65mm offset to avoid rubbing or suspension interference. Always use 14x1.5 lug nuts with the correct seat (cone or ball) matching the wheel. Improper seat or overtightening can cause wheel loss. Re-torque after 50–100 miles.
Historical Fitment Data Reference
In our dataset, Ram ProMaster Cargo Van appears from 2015 to 2024 (10 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140–150 ft-lbs after 50–100 miles of driving.
- ✅ Verify wheel bore is at least 78.1mm; use hub-centric rings if larger.
- ✅ Avoid offset below 55mm to prevent tire contact with suspension components.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Ram ProMaster Cargo Van — Frequently Asked Questions
What is the bolt pattern for a 2019 Ram ProMaster Cargo Van?
The 2019 Ram ProMaster Cargo Van uses a 5x130 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 60mm.
What other years of Ram ProMaster Cargo Van have the same bolt pattern as the 2019?
The Ram ProMaster Cargo Van uses the 5x130 pattern from 2015 through 2024. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
Do 2019 Ram ProMaster Cargo Vans use lug bolts or lug nuts?
The 2019 ProMaster Cargo Van requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the factory wheel offset for a 2019 Ram ProMaster Cargo Van?
The OEM offset for the 2019 ProMaster Cargo Van is typically around 60mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the PCD for a 2019 Ram ProMaster Cargo Van?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2019 ProMaster Cargo Van, the PCD is 5x130.
What does 60mm offset mean for the 2019 ProMaster Cargo Van?
An offset of 60mm means the wheel's mounting surface is 60mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ram.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset