2025 Rolls-Royce Cullinan Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Rolls-Royce Cullinan is 5x112. It has a center bore of 66.5 mm, an offset range of 25, and utilizes 14x1.5 (Ball seat, 21mm hex) fasteners tightened to 100 ft-lbs (135 Nm).
2025 Rolls-Royce Cullinan Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Center Bore (Hub Bore) | 66.5 mm |
| Offset Range (ET) | 25 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 100 ft-lbs (135 Nm) |
2025 Cullinan — Year-Specific Fitment Context
The 2025 Rolls-Royce Cullinan is in year 7 of 8 using the 5x112 pattern (2019–2026). Wheels from any 2019–2026 Rolls-Royce Cullinan are cross-compatible with the 2025 model.
Rolls-Royce Cullinan Bolt Pattern by Year
Looking for all generations? View the complete Rolls-Royce Cullinan (2019–2026) Bolt Pattern & Generation Guide →
The table below shows how the Cullinan's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Rolls-Royce Cullinan Wheel Interchange & Donor Fitment Guide (5x112)
The 5x112 bolt pattern is shared by 1795 vehicles in our database (very common). For safe wheel swaps on the 2025 Rolls-Royce Cullinan, donor rims must match the 5x112 PCD and have a center bore of at least 66.5 mm:
DIRECT HUB MATCH Same 5x112 Pattern & Exact 66.5mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 Audi RS e-tron GT | 66.5 mm (Exact) | 30-45 | 14x1.5 (Ball) |
| 2025 Audi RS Q8 | 66.5 mm (Exact) | 25-35 | 14x1.5 (Ball) |
| 2025 Audi S e-tron GT | 66.5 mm (Exact) | Not Applicable | 14x1.5 (Ball) |
| 2022 Audi S3 | 66.5 mm (Exact) | 30-45 | 14x1.5 (Ball) |
| 2010 Audi S4 | 66.6 mm (Exact) | 45 | B 14x1.50 (Ball) |
| 2022 Audi S5 | 66.5 mm (Exact) | 30-45 | 14x1.5 (Ball) |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Rolls-Royce Cullinan — Frequently Asked Questions
What is the bolt pattern for a 2025 Rolls-Royce Cullinan?
The 2025 Rolls-Royce Cullinan uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.5mm and the offset is 25mm.
What other years of Rolls-Royce Cullinan have the same bolt pattern as the 2025?
The Rolls-Royce Cullinan uses the 5x112 pattern from 2019 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
What is the PCD for a 2025 Rolls-Royce Cullinan?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2025 Cullinan, the PCD is 5x112.
Do 2025 Rolls-Royce Cullinans use lug bolts or lug nuts?
The 2025 Cullinan requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the factory wheel offset for a 2025 Rolls-Royce Cullinan?
The OEM offset for the 2025 Cullinan is typically around 25mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 2025 Rolls-Royce Cullinan?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →