2000 Saturn S-Series Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Saturn S-Series, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2000 S-Series — Year-Specific Fitment Context
The 2000 Saturn S-Series is in year 9 of 11 using the 4x100 pattern (1992–2002). Wheels from any 1992–2002 Saturn S-Series are cross-compatible with the 2000 model.
Saturn S-Series Bolt Pattern by Year
The table below shows how the S-Series's wheel specifications have changed over the years. The 2000 model year is highlighted.
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
Expert Buying Guide for 2000 Saturn S-Series
For your 2000 Saturn S-Series, the 4x100 bolt pattern and 57.1mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 50mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct 12x1.5 thread pitch and proper seat type (conical 60-degree for most aftermarket wheels, ball seat for factory steel wheels). Mismatched seats can lead to wheel loosening. Re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Saturn S-Series appears from 1992 to 2002 (11 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Use hub-centric rings if aftermarket wheels have a larger bore than 57.1mm to avoid vibrations.
- ✅ Stick to offset between 45-55mm to maintain proper clearance and avoid rubbing on suspension or fenders.
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles; never use impact wrenches for final tightening.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2000 Saturn S-Series — Frequently Asked Questions
What is the bolt pattern for a 2000 Saturn S-Series?
The 2000 Saturn S-Series uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 50mm.
What other years of Saturn S-Series have the same bolt pattern as the 2000?
The Saturn S-Series uses the 4x100 pattern from 1992 through 2002. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2000 Saturn S-Series?
Absolutely. Just ensure the aftermarket wheels have a 4x100 bolt pattern, an offset near 50mm, and a center bore of at least 57.1mm (using hub rings if larger).
What lug nut size does the 2000 Saturn S-Series use?
The 2000 Saturn S-Series uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Do 2000 Saturn S-Seriess use lug bolts or lug nuts?
The 2000 S-Series requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2000 Saturn S-Series?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2000 S-Series, the PCD is 4x100.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset