2002 Saturn S-Series Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2002 Saturn S-Series, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2002 S-Series — Year-Specific Fitment Context
The 2002 model year is the final year of the Saturn S-Series's 4x100 bolt pattern run (since 1992). Wheels from any 1992–2002 Saturn S-Series are cross-compatible with the 2002 model.
Saturn S-Series Bolt Pattern by Year
The table below shows how the S-Series's wheel specifications have changed over the years. The 2002 model year is highlighted.
Fitment Notes
The 2002 Saturn S-Series has a bolt pattern of 4x100.
This means it is a 4 lug pattern with a circle diameter of 100mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Saturn S-Series appears from 1992 to 2002 (11 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
2002 Saturn S-Series — Frequently Asked Questions
What is the bolt pattern for a 2002 Saturn S-Series?
The 2002 Saturn S-Series uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 50mm.
What other years of Saturn S-Series have the same bolt pattern as the 2002?
The Saturn S-Series uses the 4x100 pattern from 1992 through 2002. Wheels from any of these model years are dimensionally compatible with the 2002, provided the offset and center bore also match.
Why is matching the 57.1mm center bore important for the 2002 S-Series?
The 57.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Do 2002 Saturn S-Seriess use lug bolts or lug nuts?
The 2002 S-Series requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I put aftermarket wheels on my 2002 Saturn S-Series?
Absolutely. Just ensure the aftermarket wheels have a 4x100 bolt pattern, an offset near 50mm, and a center bore of at least 57.1mm (using hub rings if larger).
What lug nut size does the 2002 Saturn S-Series use?
The 2002 Saturn S-Series uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Saturn S-Series is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1992-2002 (11 model years).
- Observed bolt-pattern variants: 1 (4x100).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2002 Saturn S-Series, please report it via our About page contact so we can verify and update this record.