2006 Saturn VUE Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2006 Saturn VUE, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x115 |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 41-46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2006 VUE — Year-Specific Fitment Context
The 2006 Saturn VUE is in year 5 of 6 using the 5x115 pattern (2002–2007). Wheels from any 2002–2007 Saturn VUE are cross-compatible with the 2006 model. Across its full production run (2002–2010), the VUE has also used: 5x114.3.
Saturn VUE Bolt Pattern by Year
The table below shows how the VUE's wheel specifications have changed over the years. The 2006 model year is highlighted.
Fitment Notes
The 2006 Saturn VUE has a bolt pattern of 5x115.
This means it is a 5 lug pattern with a circle diameter of 115mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Saturn VUE appears from 2002 to 2010 (9 model years).
Across model years, this model appears with 2 bolt patterns (5x114.3, 5x115).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 87.0 mm
5x115 Pattern Context
This bolt pattern appears on 498 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x115:
2006 Saturn VUE — Frequently Asked Questions
What is the bolt pattern for a 2006 Saturn VUE?
The 2006 Saturn VUE uses a 5x115 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 41-46mm.
What other years of Saturn VUE have the same bolt pattern as the 2006?
The Saturn VUE uses the 5x115 pattern from 2002 through 2007. Wheels from any of these model years are dimensionally compatible with the 2006, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2006 Saturn VUE?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the PCD for a 2006 Saturn VUE?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2006 VUE, the PCD is 5x115.
Can I put aftermarket wheels on my 2006 Saturn VUE?
Absolutely. Just ensure the aftermarket wheels have a 5x115 bolt pattern, an offset near 41-46mm, and a center bore of at least 70.3mm (using hub rings if larger).
Will wheels from another Saturn fit my 2006 VUE?
Only if they share the exact same 5x115 bolt pattern, a compatible offset, and a center bore equal to or larger than 70.3mm.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Editorial Fitment Notes
Saturn VUE has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.
- Observed production years in our database: 2002-2010 (9 model years).
- Observed bolt-pattern variants: 2 (5x114.3, 5x115).
- Observed total offset span across years: 87.0 mm.
- Observed center-bore variants: 2 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2006 Saturn VUE, please report it via our About page contact so we can verify and update this record.