2005 Scion tC Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2005 Scion tC, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 54.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2005 tC — Year-Specific Fitment Context
The 2005 model year marks the beginning of the Scion tC's 5x100 bolt pattern era, which continued through 2010 (6 consecutive years). Wheels from any 2005–2010 Scion tC are cross-compatible with the 2005 model. Across its full production run (2005–2016), the tC has also used: 5x114.3.
Scion tC Bolt Pattern by Year
The table below shows how the tC's wheel specifications have changed over the years. The 2005 model year is highlighted.
Fitment Notes
The 2005 Scion tC has a bolt pattern of 5x100.
This means it is a 5 lug pattern with a circle diameter of 100mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Scion tC appears from 2005 to 2016 (12 model years).
Across model years, this model appears with 2 bolt patterns (5x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 6.0 mm
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
2005 Scion tC — Frequently Asked Questions
What is the bolt pattern for a 2005 Scion tC?
The 2005 Scion tC uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 54.1mm and the offset is 45mm.
What other years of Scion tC have the same bolt pattern as the 2005?
The Scion tC uses the 5x100 pattern from 2005 through 2010. Wheels from any of these model years are dimensionally compatible with the 2005, provided the offset and center bore also match.
What lug nut size does the 2005 Scion tC use?
The 2005 Scion tC uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I put aftermarket wheels on my 2005 Scion tC?
Absolutely. Just ensure the aftermarket wheels have a 5x100 bolt pattern, an offset near 45mm, and a center bore of at least 54.1mm (using hub rings if larger).
Can I use spacers on my 2005 Scion tC?
Yes, but ensure the wheel spacers match the 5x100 bolt pattern and 54.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
What does 45mm offset mean for the 2005 tC?
An offset of 45mm means the wheel's mounting surface is 45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Scion.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Editorial Fitment Notes
Scion tC has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.
- Observed production years in our database: 2005-2016 (12 model years).
- Observed bolt-pattern variants: 2 (5x100, 5x114.3).
- Observed total offset span across years: 6.0 mm.
- Observed center-bore variants: 2 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2005 Scion tC, please report it via our About page contact so we can verify and update this record.