2012 Scion tC Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2012 Scion tC, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 5x114.3 (5x4.5")
Lug Nut / Bolt Size 12x1.5
Center Bore (CB) 60.1 mm
Offset (ET) 39
Torque Specs 80 ft-lbs (108 Nm)

2012 tC — Year-Specific Fitment Context

The 2012 Scion tC is in year 2 of 6 using the 5x114.3 pattern (2011–2016). Wheels from any 2011–2016 Scion tC are cross-compatible with the 2012 model. Across its full production run (2005–2016), the tC has also used: 5x100.

Scion tC Bolt Pattern by Year

The table below shows how the tC's wheel specifications have changed over the years. The 2012 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2005 5x100 54.1 45
2006 5x100 54.1 45
2007 5x100 54.1 45
2008 5x100 54.1 45
2009 5x100 54.1 45
2010 5x100 54.1 45
2011 5x114.3 60.1 39
▸ 2012 5x114.3 60.1 39
2013 5x114.3 60.1 39
2014 5x114.3 60.1 39
2015 5x114.3 60.1 39
2016 5x114.3 60.1 39

Fitment Notes

The 2012 Scion tC has a bolt pattern of 5x114.3.

Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".

This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, Scion tC appears from 2005 to 2016 (12 model years).

Across model years, this model appears with 2 bolt patterns (5x100, 5x114.3).

5x114.3 Pattern Context

This bolt pattern appears on 2902 vehicles in our current database and is considered very common.

Examples of other vehicles using 5x114.3:

2012 Scion tC — Frequently Asked Questions

What is the bolt pattern for a 2012 Scion tC?

The 2012 Scion tC uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 39mm.

What other years of Scion tC have the same bolt pattern as the 2012?

The Scion tC uses the 5x114.3 pattern from 2011 through 2016. Wheels from any of these model years are dimensionally compatible with the 2012, provided the offset and center bore also match.

Do 2012 Scion tCs use lug bolts or lug nuts?

The 2012 tC requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.

Can I use spacers on my 2012 Scion tC?

Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 60.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.

How tight should I torque the lug nuts on a 2012 Scion tC?

Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.

What is the factory wheel offset for a 2012 Scion tC?

The OEM offset for the 2012 tC is typically around 39mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

Scion tC has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 2012 Scion tC, please report it via our About page contact so we can verify and update this record.

Scion tC By Year

2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016

Other Scion Models

FR-S iA iM iQ tC xA xB xD