2013 Scion tC Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2013 Scion tC, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 39 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2013 tC — Year-Specific Fitment Context
The 2013 Scion tC is in year 3 of 6 using the 5x114.3 pattern (2011–2016). Wheels from any 2011–2016 Scion tC are cross-compatible with the 2013 model. Across its full production run (2005–2016), the tC has also used: 5x100.
Scion tC Bolt Pattern by Year
The table below shows how the tC's wheel specifications have changed over the years. The 2013 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2013 Scion tC
For the 2013 Scion tC, the correct bolt pattern is 5x114.3 with a center bore of 60.1mm. When installing aftermarket wheels, hub-centric rings are essential to match the bore precisely, preventing vibrations and ensuring proper load distribution. The factory offset is 39mm; deviations beyond ±5mm may cause rubbing or clearance issues with suspension and fenders. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—factory wheels use a conical (60-degree) seat. Avoid ball-seat or shank-style nuts, as they can loosen or damage the wheel. Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
Historical Fitment Data Reference
In our dataset, Scion tC appears from 2005 to 2016 (12 model years). Across model years, this model appears with 2 bolt patterns (5x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 6.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80 ft-lbs after 50-100 miles of driving to prevent loosening.
- ✅ If using aftermarket wheels, verify that the hub bore is at least 60.1mm or use hub-centric rings to avoid vibrations.
- ✅ Check offset carefully: wheels with offset below 34mm may rub the fender, while above 44mm may contact the strut.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2013 Scion tC — Frequently Asked Questions
What is the bolt pattern for a 2013 Scion tC?
The 2013 Scion tC uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 39mm.
What other years of Scion tC have the same bolt pattern as the 2013?
The Scion tC uses the 5x114.3 pattern from 2011 through 2016. Wheels from any of these model years are dimensionally compatible with the 2013, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2013 Scion tC?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 39mm, and a center bore of at least 60.1mm (using hub rings if larger).
How tight should I torque the lug nuts on a 2013 Scion tC?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I use spacers on my 2013 Scion tC?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 60.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
What lug nut size does the 2013 Scion tC use?
The 2013 Scion tC uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset