2010 Scion xB Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Scion xB, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 5x114.3 (5x4.5")
Lug Nut / Bolt Size 12x1.5
Center Bore (CB) 60.1 mm
Offset (ET) 45
Torque Specs 80 ft-lbs (108 Nm)

2010 xB — Year-Specific Fitment Context

The 2010 Scion xB is in year 3 of 8 using the 5x114.3 pattern (2008–2015). Wheels from any 2008–2015 Scion xB are cross-compatible with the 2010 model. Across its full production run (2004–2015), the xB has also used: 4x100.

Scion xB Bolt Pattern by Year

The table below shows how the xB's wheel specifications have changed over the years. The 2010 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2004 4x100 54.1 45
2005 4x100 54.1 45
2006 4x100 54.1 45
2008 5x114.3 60.1 45
2009 5x114.3 60.1 45
▸ 2010 5x114.3 60.1 45
2011 5x114.3 60.1 45
2012 5x114.3 60.1 45
2013 5x114.3 60.1 45
2014 5x114.3 60.1 45
2015 5x114.3 60.1 45

Fitment Notes

The 2010 Scion xB has a bolt pattern of 5x114.3.

Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".

This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, Scion xB appears from 2004 to 2015 (11 model years).

Across model years, this model appears with 2 bolt patterns (4x100, 5x114.3).

5x114.3 Pattern Context

This bolt pattern appears on 2902 vehicles in our current database and is considered very common.

Examples of other vehicles using 5x114.3:

2010 Scion xB — Frequently Asked Questions

What is the bolt pattern for a 2010 Scion xB?

The 2010 Scion xB uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 45mm.

What other years of Scion xB have the same bolt pattern as the 2010?

The Scion xB uses the 5x114.3 pattern from 2008 through 2015. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.

What lug nut size does the 2010 Scion xB use?

The 2010 Scion xB uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.

What is the center bore of a 2010 Scion xB?

The factory center bore (hub bore) for the 2010 Scion xB is 60.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.

How tight should I torque the lug nuts on a 2010 Scion xB?

Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.

Do 2010 Scion xBs use lug bolts or lug nuts?

The 2010 xB requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

Scion xB has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 2010 Scion xB, please report it via our About page contact so we can verify and update this record.

Scion xB By Year

2004 2005 2006 2008 2009 2010 2011 2012 2013 2014 2015

Other Scion Models

FR-S iA iM iQ tC xA xB xD