1993 Subaru SVX Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1993 Subaru SVX, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 48 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1993 SVX — Year-Specific Fitment Context
The 1993 Subaru SVX is in year 2 of 6 using the 5x100 pattern (1992–1997). Wheels from any 1992–1997 Subaru SVX are cross-compatible with the 1993 model.
Subaru SVX Bolt Pattern by Year
The table below shows how the SVX's wheel specifications have changed over the years. The 1993 model year is highlighted.
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
Expert Buying Guide for 1993 Subaru SVX
For your 1993 Subaru SVX, the bolt pattern is 5x100 with a center bore of 56.1mm. When selecting aftermarket wheels, ensure they have a bore at least 56.1mm or use hub-centric rings to avoid vibration. The offset is critical: stock is 48mm, but a range of 45-55mm is acceptable; lower offset pushes wheels outward, risking fender rub. Always use lug nuts with the correct thread pitch (12x1.25) and seat type—factory wheels use a ball seat, while many aftermarket wheels require a conical (60-degree) seat. Never mix seat types, as improper seating can cause lug nuts to loosen. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Subaru SVX appears from 1992 to 1997 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 70-80 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels with a larger center bore, install hub-centric rings to match the 56.1mm hub.
- ✅ Avoid wheels with offset below 45mm on the SVX; they may rub the fenders or struts.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1993 Subaru SVX — Frequently Asked Questions
What is the bolt pattern for a 1993 Subaru SVX?
The 1993 Subaru SVX uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 48mm.
What other years of Subaru SVX have the same bolt pattern as the 1993?
The Subaru SVX uses the 5x100 pattern from 1992 through 1997. Wheels from any of these model years are dimensionally compatible with the 1993, provided the offset and center bore also match.
What is the center bore of a 1993 Subaru SVX?
The factory center bore (hub bore) for the 1993 Subaru SVX is 56.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the PCD for a 1993 Subaru SVX?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1993 SVX, the PCD is 5x100.
How tight should I torque the lug nuts on a 1993 Subaru SVX?
Refer to your owner's manual for exact specs, but always tighten the 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I put aftermarket wheels on my 1993 Subaru SVX?
Absolutely. Just ensure the aftermarket wheels have a 5x100 bolt pattern, an offset near 48mm, and a center bore of at least 56.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset