1997 Subaru SVX Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1997 Subaru SVX, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 48 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1997 SVX — Year-Specific Fitment Context
The 1997 model year is the final year of the Subaru SVX's 5x100 bolt pattern run (since 1992). Wheels from any 1992–1997 Subaru SVX are cross-compatible with the 1997 model.
Subaru SVX Bolt Pattern by Year
The table below shows how the SVX's wheel specifications have changed over the years. The 1997 model year is highlighted.
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
Expert Buying Guide for 1997 Subaru SVX
When selecting wheels for your 1997 Subaru SVX, the 5x100 bolt pattern is shared with other Subaru models from 1992-1997. The 56.1mm center bore is critical; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. Offset is sensitive: the factory 48mm offset maintains suspension geometry and clearance. Deviating more than ±5mm may cause rubbing or bearing stress. Always use the correct 12x1.25 lug nuts with the proper seat type (cone or ball) matching the wheel. Improper lug nuts can lead to wheel loss. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Subaru SVX appears from 1992 to 1997 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 70-80 ft-lbs after 50-100 miles of driving.
- ✅ Verify wheel bore is 56.1mm or use hub-centric rings to avoid vibrations.
- ✅ Avoid offset below 43mm or above 53mm to prevent rubbing on struts or fenders.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1997 Subaru SVX — Frequently Asked Questions
What is the bolt pattern for a 1997 Subaru SVX?
The 1997 Subaru SVX uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 48mm.
What other years of Subaru SVX have the same bolt pattern as the 1997?
The Subaru SVX uses the 5x100 pattern from 1992 through 1997. Wheels from any of these model years are dimensionally compatible with the 1997, provided the offset and center bore also match.
Do 1997 Subaru SVXs use lug bolts or lug nuts?
The 1997 SVX requires 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Will wheels from another Subaru fit my 1997 SVX?
Only if they share the exact same 5x100 bolt pattern, a compatible offset, and a center bore equal to or larger than 56.1mm.
Can I use spacers on my 1997 Subaru SVX?
Yes, but ensure the wheel spacers match the 5x100 bolt pattern and 56.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
How tight should I torque the lug nuts on a 1997 Subaru SVX?
Refer to your owner's manual for exact specs, but always tighten the 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset