2026 Subaru WRX Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Subaru WRX is 5x114.3 (5x4.5"). It has a center bore of 56.1 mm, an offset range of 45-55, and utilizes 12x1.25 (Flat seat, 21mm hex) fasteners tightened to 89 ft-lbs (120 Nm).
2026 Subaru WRX Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 56.1 mm |
| Offset Range (ET) | 45-55 |
| Thread Size (Lug Nut / Bolt) | 12x1.25 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 89 ft-lbs (120 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2026 WRX — Year-Specific Fitment Context
The 2026 model year is the final year of the Subaru WRX's 5x114.3 bolt pattern run (since 2015). Wheels from any 2015–2026 Subaru WRX are cross-compatible with the 2026 model.
Subaru WRX Bolt Pattern by Year
Looking for all generations? View the complete Subaru WRX (2015–2026) Bolt Pattern & Generation Guide →
The table below shows how the WRX's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Subaru WRX Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 Subaru WRX, donor rims must match the 5x114.3 PCD and have a center bore of at least 56.1 mm:
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2026 Toyota Sienna | 60.1 mm | 60.1mm → 56.1mm |
35-45 |
| 2024 Toyota Venza | 60.1 mm | 60.1mm → 56.1mm |
35-45 |
| 2025 Acura ADX | 64.1 mm | 64.1mm → 56.1mm |
40 |
| 2023 Acura ILX | 64.1 mm | 64.1mm → 56.1mm |
45 |
| 2023 Acura Integra | 64.1 mm | 64.1mm → 56.1mm |
45 |
| 2014 Acura MDX | 64.1 mm | 64.1mm → 56.1mm |
45 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 89 ft-lbs (120 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Subaru WRX — Frequently Asked Questions
What is the bolt pattern for a 2026 Subaru WRX?
The 2026 Subaru WRX uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 45-55mm.
What other years of Subaru WRX have the same bolt pattern as the 2026?
The Subaru WRX uses the 5x114.3 pattern from 2015 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
Do 2026 Subaru WRXs use lug bolts or lug nuts?
The 2026 WRX requires 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What lug nut size does the 2026 Subaru WRX use?
The 2026 Subaru WRX uses 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How do I measure the bolt pattern on my 2026 Subaru?
The 2026 WRX uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the PCD for a 2026 Subaru WRX?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2026 WRX, the PCD is 5x114.3.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →