2025 Subaru WRX Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Subaru WRX is 5x114.3 (5x4.5"). It has a center bore of 56.1 mm, an offset range of 45-55, and utilizes 12x1.25 (Flat seat, 21mm hex) fasteners tightened to 89 ft-lbs (120 Nm).
2025 Subaru WRX Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 56.1 mm |
| Offset Range (ET) | 45-55 |
| Thread Size (Lug Nut / Bolt) | 12x1.25 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 89 ft-lbs (120 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2025 WRX — Year-Specific Fitment Context
The 2025 Subaru WRX is in year 11 of 12 using the 5x114.3 pattern (2015–2026). Wheels from any 2015–2026 Subaru WRX are cross-compatible with the 2025 model.
Subaru WRX Bolt Pattern by Year
Looking for all generations? View the complete Subaru WRX (2015–2026) Bolt Pattern & Generation Guide →
The table below shows how the WRX's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Subaru WRX Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2025 Subaru WRX, donor rims must match the 5x114.3 PCD and have a center bore of at least 56.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 56.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 Subaru Legacy | 56.1 mm (Exact) | 48-55 | 12x1.25 (Flat) |
| 2016 Subaru Outback | 56.1 mm (Exact) | 55 | N 12x1.25 (Cone) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2025 Subaru Solterra | 60.1 mm | 60.1mm → 56.1mm |
40 |
| 2007 Suzuki Grand Vitara | 60.1 mm | 60.1mm → 56.1mm |
45 |
| 2025 Tesla Model 3 | 64.1 mm | 64.1mm → 56.1mm |
35-45 |
| 2025 Tesla Model Y | 64.1 mm | 64.1mm → 56.1mm |
35-45 |
| 2002 Toyota 4Runner | 106.1 mm | 106.1mm → 56.1mm |
12 |
| 2022 Toyota Avalon | 60.1 mm | 60.1mm → 56.1mm |
35-45 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 89 ft-lbs (120 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Subaru WRX — Frequently Asked Questions
What is the bolt pattern for a 2025 Subaru WRX?
The 2025 Subaru WRX uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 45-55mm.
What other years of Subaru WRX have the same bolt pattern as the 2025?
The Subaru WRX uses the 5x114.3 pattern from 2015 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
What is the center bore of a 2025 Subaru WRX?
The factory center bore (hub bore) for the 2025 Subaru WRX is 56.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the PCD for a 2025 Subaru WRX?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2025 WRX, the PCD is 5x114.3.
Can I put aftermarket wheels on my 2025 Subaru WRX?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 45-55mm, and a center bore of at least 56.1mm (using hub rings if larger).
Can I use spacers on my 2025 Subaru WRX?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 56.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →