2016 Subaru Outback Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2016 Subaru Outback, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 55 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2016 Outback — Year-Specific Fitment Context
The 2016 model year marks the beginning of the Subaru Outback's 5x114.3 bolt pattern era, which continued through 2024 (9 consecutive years). Wheels from any 2016–2024 Subaru Outback are cross-compatible with the 2016 model. Note: the 2015 model used a different pattern (5x100), so its wheels are NOT interchangeable with the 2016. Across its full production run (2000–2024), the Outback has also used: 5x100.
Subaru Outback Bolt Pattern by Year
The table below shows how the Outback's wheel specifications have changed over the years. The 2016 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2000 | 5x100 | 56.1 | 48 |
| 2001 | 5x100 | 56.1 | 48 |
| 2002 | 5x100 | 56.1 | 48 |
| 2003 | 5x100 | 56.1 | 48 |
| 2004 | 5x100 | 56.1 | 48 |
| 2005 | 5x100 | 56.1 | 48 |
| 2006 | 5x100 | 56.1 | 48 |
| 2007 | 5x100 | 56.1 | 48 |
| 2008 | 5x100 | 56.1 | 48 |
| 2009 | 5x100 | 56.1 | 48 |
| 2010 | 5x100 | 56.1 | 48 |
| 2011 | 5x100 | 56.1 | 48 |
| 2012 | 5x100 | 56.1 | 48 |
| 2013 | 5x100 | 56.1 | 48 |
| 2014 | 5x100 | 56.1 | 48 |
| 2015 | 5x100 | 56.1 | 48 |
| ▸ 2016 | 5x114.3 | 56.1 | 55 |
| 2017 | 5x114.3 | 56.1 | 55 |
| 2018 | 5x114.3 | 56.1 | 55 |
| 2019 | 5x114.3 | 56.1 | 55 |
| 2020 | 5x114.3 | 56.1 | 55 |
| 2021 | 5x114.3 | 56.1 | 55 |
| 2022 | 5x114.3 | 56.1 | 55 |
| 2023 | 5x114.3 | 56.1 | 55 |
| 2024 | 5x114.3 | 56.1 | 55 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2016 Subaru Outback
The 2016 Subaru Outback uses a 5x114.3 bolt pattern with a 56.1mm center bore and 55mm offset. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration. Offset should stay within ±5mm of 55mm to avoid rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.25) and seat type (conical/60-degree taper). Ball-seat or shank-style lug nuts are not compatible and can cause wheel loosening. Verify that aftermarket wheels are hub-centric and load-rated for the Outback's weight.
Historical Fitment Data Reference
In our dataset, Subaru Outback appears from 2000 to 2024 (25 model years). Across model years, this model appears with 2 bolt patterns (5x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 7.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels from 2015 or earlier Outback models (5x100 pattern) as they will not fit.
- ✅ Check for brake caliper clearance when using wheels with offset below 50mm or above 60mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2016 Subaru Outback — Frequently Asked Questions
What is the bolt pattern for a 2016 Subaru Outback?
The 2016 Subaru Outback uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 55mm.
What other years of Subaru Outback have the same bolt pattern as the 2016?
The Subaru Outback uses the 5x114.3 pattern from 2016 through 2024. Wheels from any of these model years are dimensionally compatible with the 2016, provided the offset and center bore also match.
Can I use 2015 Subaru Outback wheels on a 2016?
No. The 2015 Outback used a 5x100 bolt pattern, which differs from the 2016's 5x114.3. They are not interchangeable.
What is the PCD for a 2016 Subaru Outback?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2016 Outback, the PCD is 5x114.3.
What is the factory wheel offset for a 2016 Subaru Outback?
The OEM offset for the 2016 Outback is typically around 55mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Why is matching the 56.1mm center bore important for the 2016 Outback?
The 56.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset