2024 Subaru Outback Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Subaru Outback, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 55 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2024 Outback — Year-Specific Fitment Context
The 2024 model year is the final year of the Subaru Outback's 5x114.3 bolt pattern run (since 2016). Wheels from any 2016–2024 Subaru Outback are cross-compatible with the 2024 model. Across its full production run (2000–2024), the Outback has also used: 5x100.
Subaru Outback Bolt Pattern by Year
The table below shows how the Outback's wheel specifications have changed over the years. The 2024 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2000 | 5x100 | 56.1 | 48 |
| 2001 | 5x100 | 56.1 | 48 |
| 2002 | 5x100 | 56.1 | 48 |
| 2003 | 5x100 | 56.1 | 48 |
| 2004 | 5x100 | 56.1 | 48 |
| 2005 | 5x100 | 56.1 | 48 |
| 2006 | 5x100 | 56.1 | 48 |
| 2007 | 5x100 | 56.1 | 48 |
| 2008 | 5x100 | 56.1 | 48 |
| 2009 | 5x100 | 56.1 | 48 |
| 2010 | 5x100 | 56.1 | 48 |
| 2011 | 5x100 | 56.1 | 48 |
| 2012 | 5x100 | 56.1 | 48 |
| 2013 | 5x100 | 56.1 | 48 |
| 2014 | 5x100 | 56.1 | 48 |
| 2015 | 5x100 | 56.1 | 48 |
| 2016 | 5x114.3 | 56.1 | 55 |
| 2017 | 5x114.3 | 56.1 | 55 |
| 2018 | 5x114.3 | 56.1 | 55 |
| 2019 | 5x114.3 | 56.1 | 55 |
| 2020 | 5x114.3 | 56.1 | 55 |
| 2021 | 5x114.3 | 56.1 | 55 |
| 2022 | 5x114.3 | 56.1 | 55 |
| 2023 | 5x114.3 | 56.1 | 55 |
| ▸ 2024 | 5x114.3 | 56.1 | 55 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2024 Subaru Outback
For your 2024 Subaru Outback, the bolt pattern is 5x114.3, shared with 2016–2024 models. The center bore is 56.1mm; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibrations and ensure proper load distribution. Offset is critical: stock is 55mm. Sticking within ±5mm is safe; lower offset pushes wheels outward, risking fender rub and bearing stress. Always use the correct lug nuts: 12x1.25 thread pitch with a conical (60-degree) seat. Flat or ball-seat nuts can loosen or damage the wheel. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Subaru Outback appears from 2000 to 2024 (25 model years). Across model years, this model appears with 2 bolt patterns (5x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 7.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 85-95 ft-lbs after 50-100 miles, then periodically.
- ✅ Avoid using wheels from 2000-2015 Outbacks (5x100) without adapters; they won't fit directly.
- ✅ If lowering the car, check for inner clearance with 18x8.5 +45 wheels; may need camber adjustment.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Subaru Outback — Frequently Asked Questions
What is the bolt pattern for a 2024 Subaru Outback?
The 2024 Subaru Outback uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 55mm.
What other years of Subaru Outback have the same bolt pattern as the 2024?
The Subaru Outback uses the 5x114.3 pattern from 2016 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2024 Subaru?
The 2024 Outback uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What does 55mm offset mean for the 2024 Outback?
An offset of 55mm means the wheel's mounting surface is 55mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Subaru.
Can I use spacers on my 2024 Subaru Outback?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 56.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
What is the factory wheel offset for a 2024 Subaru Outback?
The OEM offset for the 2024 Outback is typically around 55mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset