2007 Subaru Outback Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Subaru Outback, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 48 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2007 Outback — Year-Specific Fitment Context
The 2007 Subaru Outback is in year 8 of 16 using the 5x100 pattern (2000–2015). Wheels from any 2000–2015 Subaru Outback are cross-compatible with the 2007 model. Across its full production run (2000–2024), the Outback has also used: 5x114.3.
Subaru Outback Bolt Pattern by Year
The table below shows how the Outback's wheel specifications have changed over the years. The 2007 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2000 | 5x100 | 56.1 | 48 |
| 2001 | 5x100 | 56.1 | 48 |
| 2002 | 5x100 | 56.1 | 48 |
| 2003 | 5x100 | 56.1 | 48 |
| 2004 | 5x100 | 56.1 | 48 |
| 2005 | 5x100 | 56.1 | 48 |
| 2006 | 5x100 | 56.1 | 48 |
| ▸ 2007 | 5x100 | 56.1 | 48 |
| 2008 | 5x100 | 56.1 | 48 |
| 2009 | 5x100 | 56.1 | 48 |
| 2010 | 5x100 | 56.1 | 48 |
| 2011 | 5x100 | 56.1 | 48 |
| 2012 | 5x100 | 56.1 | 48 |
| 2013 | 5x100 | 56.1 | 48 |
| 2014 | 5x100 | 56.1 | 48 |
| 2015 | 5x100 | 56.1 | 48 |
| 2016 | 5x114.3 | 56.1 | 55 |
| 2017 | 5x114.3 | 56.1 | 55 |
| 2018 | 5x114.3 | 56.1 | 55 |
| 2019 | 5x114.3 | 56.1 | 55 |
| 2020 | 5x114.3 | 56.1 | 55 |
| 2021 | 5x114.3 | 56.1 | 55 |
| 2022 | 5x114.3 | 56.1 | 55 |
| 2023 | 5x114.3 | 56.1 | 55 |
| 2024 | 5x114.3 | 56.1 | 55 |
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
Expert Buying Guide for 2007 Subaru Outback
For your 2007 Subaru Outback, the 5x100 bolt pattern and 56.1mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The recommended offset is 48mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.25) and seat type—factory wheels use a ball seat, while aftermarket wheels may require conical (60-degree) or ball seat lug nuts. Mismatched lug nuts can lead to wheel loosening. Verify all specifications before installation.
Historical Fitment Data Reference
In our dataset, Subaru Outback appears from 2000 to 2024 (25 model years). Across model years, this model appears with 2 bolt patterns (5x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 7.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Check for caliper clearance when using aftermarket wheels, especially with larger brakes.
- ✅ Avoid using wheels from 5x114.3 pattern Subarus without proper adapters or hub-centric rings.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 Subaru Outback — Frequently Asked Questions
What is the bolt pattern for a 2007 Subaru Outback?
The 2007 Subaru Outback uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 48mm.
What other years of Subaru Outback have the same bolt pattern as the 2007?
The Subaru Outback uses the 5x100 pattern from 2000 through 2015. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
What is the PCD for a 2007 Subaru Outback?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2007 Outback, the PCD is 5x100.
Why is matching the 56.1mm center bore important for the 2007 Outback?
The 56.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the center bore of a 2007 Subaru Outback?
The factory center bore (hub bore) for the 2007 Subaru Outback is 56.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Do 2007 Subaru Outbacks use lug bolts or lug nuts?
The 2007 Outback requires N 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset