2001 Subaru Outback Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2001 Subaru Outback, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 48 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2001 Outback — Year-Specific Fitment Context
The 2001 Subaru Outback is in year 2 of 16 using the 5x100 pattern (2000–2015). Wheels from any 2000–2015 Subaru Outback are cross-compatible with the 2001 model. Across its full production run (2000–2024), the Outback has also used: 5x114.3.
Subaru Outback Bolt Pattern by Year
The table below shows how the Outback's wheel specifications have changed over the years. The 2001 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2000 | 5x100 | 56.1 | 48 |
| ▸ 2001 | 5x100 | 56.1 | 48 |
| 2002 | 5x100 | 56.1 | 48 |
| 2003 | 5x100 | 56.1 | 48 |
| 2004 | 5x100 | 56.1 | 48 |
| 2005 | 5x100 | 56.1 | 48 |
| 2006 | 5x100 | 56.1 | 48 |
| 2007 | 5x100 | 56.1 | 48 |
| 2008 | 5x100 | 56.1 | 48 |
| 2009 | 5x100 | 56.1 | 48 |
| 2010 | 5x100 | 56.1 | 48 |
| 2011 | 5x100 | 56.1 | 48 |
| 2012 | 5x100 | 56.1 | 48 |
| 2013 | 5x100 | 56.1 | 48 |
| 2014 | 5x100 | 56.1 | 48 |
| 2015 | 5x100 | 56.1 | 48 |
| 2016 | 5x114.3 | 56.1 | 55 |
| 2017 | 5x114.3 | 56.1 | 55 |
| 2018 | 5x114.3 | 56.1 | 55 |
| 2019 | 5x114.3 | 56.1 | 55 |
| 2020 | 5x114.3 | 56.1 | 55 |
| 2021 | 5x114.3 | 56.1 | 55 |
| 2022 | 5x114.3 | 56.1 | 55 |
| 2023 | 5x114.3 | 56.1 | 55 |
| 2024 | 5x114.3 | 56.1 | 55 |
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
Expert Buying Guide for 2001 Subaru Outback
For your 2001 Subaru Outback, the 5x100 bolt pattern and 56.1mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive: stock is 48mm, but 45-55mm is acceptable. Sticking close to 48mm maintains suspension geometry and prevents rubbing. Always use lug nuts with the correct thread pitch (12x1.25) and seat type (tapered 60° cone seat for most aftermarket wheels; ball seat for OEM). Never mix seat types. Re-torque after 50-100 miles to prevent loosening.
Historical Fitment Data Reference
In our dataset, Subaru Outback appears from 2000 to 2024 (25 model years). Across model years, this model appears with 2 bolt patterns (5x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 7.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ Avoid using wheels with a 5x114.3 pattern without adapters; they are not compatible.
- ✅ Check for caliper clearance with aftermarket wheels; some designs may require spacers.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2001 Subaru Outback — Frequently Asked Questions
What is the bolt pattern for a 2001 Subaru Outback?
The 2001 Subaru Outback uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 48mm.
What other years of Subaru Outback have the same bolt pattern as the 2001?
The Subaru Outback uses the 5x100 pattern from 2000 through 2015. Wheels from any of these model years are dimensionally compatible with the 2001, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2001 Subaru?
The 2001 Outback uses a 5x100 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Why is matching the 56.1mm center bore important for the 2001 Outback?
The 56.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the factory wheel offset for a 2001 Subaru Outback?
The OEM offset for the 2001 Outback is typically around 48mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I put aftermarket wheels on my 2001 Subaru Outback?
Absolutely. Just ensure the aftermarket wheels have a 5x100 bolt pattern, an offset near 48mm, and a center bore of at least 56.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset