2006 Subaru Outback Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2006 Subaru Outback, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 48 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2006 Outback — Year-Specific Fitment Context
The 2006 Subaru Outback is in year 7 of 16 using the 5x100 pattern (2000–2015). Wheels from any 2000–2015 Subaru Outback are cross-compatible with the 2006 model. Across its full production run (2000–2024), the Outback has also used: 5x114.3.
Subaru Outback Bolt Pattern by Year
The table below shows how the Outback's wheel specifications have changed over the years. The 2006 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2000 | 5x100 | 56.1 | 48 |
| 2001 | 5x100 | 56.1 | 48 |
| 2002 | 5x100 | 56.1 | 48 |
| 2003 | 5x100 | 56.1 | 48 |
| 2004 | 5x100 | 56.1 | 48 |
| 2005 | 5x100 | 56.1 | 48 |
| ▸ 2006 | 5x100 | 56.1 | 48 |
| 2007 | 5x100 | 56.1 | 48 |
| 2008 | 5x100 | 56.1 | 48 |
| 2009 | 5x100 | 56.1 | 48 |
| 2010 | 5x100 | 56.1 | 48 |
| 2011 | 5x100 | 56.1 | 48 |
| 2012 | 5x100 | 56.1 | 48 |
| 2013 | 5x100 | 56.1 | 48 |
| 2014 | 5x100 | 56.1 | 48 |
| 2015 | 5x100 | 56.1 | 48 |
| 2016 | 5x114.3 | 56.1 | 55 |
| 2017 | 5x114.3 | 56.1 | 55 |
| 2018 | 5x114.3 | 56.1 | 55 |
| 2019 | 5x114.3 | 56.1 | 55 |
| 2020 | 5x114.3 | 56.1 | 55 |
| 2021 | 5x114.3 | 56.1 | 55 |
| 2022 | 5x114.3 | 56.1 | 55 |
| 2023 | 5x114.3 | 56.1 | 55 |
| 2024 | 5x114.3 | 56.1 | 55 |
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
Expert Buying Guide for 2006 Subaru Outback
The 2006 Subaru Outback uses a 5x100 bolt pattern with a 56.1mm center bore. When selecting aftermarket wheels, ensure they have a bore of at least 56.1mm; use hub-centric rings to prevent vibrations and ensure proper load transfer. The recommended offset is 48mm; deviations beyond ±5mm may cause rubbing or clearance issues with suspension and brakes. Always use lug nuts with the correct thread pitch (12x1.25) and seat type (conical/60-degree taper). Ball-seat or incorrect lug nuts can lead to wheel loosening. For safety, verify that aftermarket wheels are load-rated for the Outback's weight.
Historical Fitment Data Reference
In our dataset, Subaru Outback appears from 2000 to 2024 (25 model years). Across model years, this model appears with 2 bolt patterns (5x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 7.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ Avoid wheels with a center bore smaller than 56.1mm; they will not fit without machining.
- ✅ Check for caliper clearance when using wheels with offset below 43mm or above 53mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2006 Subaru Outback — Frequently Asked Questions
What is the bolt pattern for a 2006 Subaru Outback?
The 2006 Subaru Outback uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 48mm.
What other years of Subaru Outback have the same bolt pattern as the 2006?
The Subaru Outback uses the 5x100 pattern from 2000 through 2015. Wheels from any of these model years are dimensionally compatible with the 2006, provided the offset and center bore also match.
Why is matching the 56.1mm center bore important for the 2006 Outback?
The 56.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the center bore of a 2006 Subaru Outback?
The factory center bore (hub bore) for the 2006 Subaru Outback is 56.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I put aftermarket wheels on my 2006 Subaru Outback?
Absolutely. Just ensure the aftermarket wheels have a 5x100 bolt pattern, an offset near 48mm, and a center bore of at least 56.1mm (using hub rings if larger).
How do I measure the bolt pattern on my 2006 Subaru?
The 2006 Outback uses a 5x100 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset