2000 Subaru Outback Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Subaru Outback, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 48 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2000 Outback — Year-Specific Fitment Context
The 2000 model year marks the beginning of the Subaru Outback's 5x100 bolt pattern era, which continued through 2015 (16 consecutive years). Wheels from any 2000–2015 Subaru Outback are cross-compatible with the 2000 model. Across its full production run (2000–2024), the Outback has also used: 5x114.3.
Subaru Outback Bolt Pattern by Year
The table below shows how the Outback's wheel specifications have changed over the years. The 2000 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 2000 | 5x100 | 56.1 | 48 |
| 2001 | 5x100 | 56.1 | 48 |
| 2002 | 5x100 | 56.1 | 48 |
| 2003 | 5x100 | 56.1 | 48 |
| 2004 | 5x100 | 56.1 | 48 |
| 2005 | 5x100 | 56.1 | 48 |
| 2006 | 5x100 | 56.1 | 48 |
| 2007 | 5x100 | 56.1 | 48 |
| 2008 | 5x100 | 56.1 | 48 |
| 2009 | 5x100 | 56.1 | 48 |
| 2010 | 5x100 | 56.1 | 48 |
| 2011 | 5x100 | 56.1 | 48 |
| 2012 | 5x100 | 56.1 | 48 |
| 2013 | 5x100 | 56.1 | 48 |
| 2014 | 5x100 | 56.1 | 48 |
| 2015 | 5x100 | 56.1 | 48 |
| 2016 | 5x114.3 | 56.1 | 55 |
| 2017 | 5x114.3 | 56.1 | 55 |
| 2018 | 5x114.3 | 56.1 | 55 |
| 2019 | 5x114.3 | 56.1 | 55 |
| 2020 | 5x114.3 | 56.1 | 55 |
| 2021 | 5x114.3 | 56.1 | 55 |
| 2022 | 5x114.3 | 56.1 | 55 |
| 2023 | 5x114.3 | 56.1 | 55 |
| 2024 | 5x114.3 | 56.1 | 55 |
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
Expert Buying Guide for 2000 Subaru Outback
The 2000 Subaru Outback uses a 5x100 bolt pattern with a 56.1mm center bore. When installing aftermarket wheels, hub-centric rings are essential to match the bore precisely, preventing vibrations and ensuring proper load distribution. The factory offset is 48mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.25) and seat type—either conical (60-degree) or ball seat, matching the wheel's design. Never mix seat types, as improper seating can lead to lug nut loosening or wheel detachment. Verify that aftermarket wheels are hub-centric or use rings, and check offset compatibility with your suspension and brakes.
Historical Fitment Data Reference
In our dataset, Subaru Outback appears from 2000 to 2024 (25 model years). Across model years, this model appears with 2 bolt patterns (5x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 7.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating and prevent loosening.
- ✅ Avoid using universal fitment wheels without verifying center bore and offset; hub rings are mandatory for non-OEM bores.
- ✅ Inspect wheel clearance with the strut and brake caliper before final installation, especially with wider or lower-offset wheels.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2000 Subaru Outback — Frequently Asked Questions
What is the bolt pattern for a 2000 Subaru Outback?
The 2000 Subaru Outback uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 48mm.
What other years of Subaru Outback have the same bolt pattern as the 2000?
The Subaru Outback uses the 5x100 pattern from 2000 through 2015. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
What lug nut size does the 2000 Subaru Outback use?
The 2000 Subaru Outback uses N 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I use spacers on my 2000 Subaru Outback?
Yes, but ensure the wheel spacers match the 5x100 bolt pattern and 56.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.25 hardware.
How tight should I torque the lug nuts on a 2000 Subaru Outback?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What does 48mm offset mean for the 2000 Outback?
An offset of 48mm means the wheel's mounting surface is 48mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Subaru.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset