2014 Subaru Outback Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2014 Subaru Outback is 5x100. It has a center bore of 56.1 mm, an offset range of 48, and utilizes N 12x1.25 (Cone seat, 19mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2014 Subaru Outback Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Center Bore (Hub Bore) | 56.1 mm |
| Offset Range (ET) | 48 |
| Thread Size (Lug Nut / Bolt) | N 12x1.25 |
| Fastener Seat Type | Conical 60Β° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 19mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
2014 Outback β Year-Specific Fitment Context
The 2014 Subaru Outback is in year 15 of 16 using the 5x100 pattern (2000β2015). Wheels from any 2000β2015 Subaru Outback are cross-compatible with the 2014 model. Across its full production run (2000β2025), the Outback has also used: 5x114.3.
Subaru Outback Bolt Pattern by Year
The table below shows how the Outback's wheel specifications have changed over the years. The 2014 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2000 | 5x100 | 56.1 | 48 |
| 2001 | 5x100 | 56.1 | 48 |
| 2002 | 5x100 | 56.1 | 48 |
| 2003 | 5x100 | 56.1 | 48 |
| 2004 | 5x100 | 56.1 | 48 |
| 2005 | 5x100 | 56.1 | 48 |
| 2006 | 5x100 | 56.1 | 48 |
| 2007 | 5x100 | 56.1 | 48 |
| 2008 | 5x100 | 56.1 | 48 |
| 2009 | 5x100 | 56.1 | 48 |
| 2010 | 5x100 | 56.1 | 48 |
| 2011 | 5x100 | 56.1 | 48 |
| 2012 | 5x100 | 56.1 | 48 |
| 2013 | 5x100 | 56.1 | 48 |
| βΈ 2014 | 5x100 | 56.1 | 48 |
| 2015 | 5x100 | 56.1 | 48 |
| 2016 | 5x114.3 | 56.1 | 55 |
| 2017 | 5x114.3 | 56.1 | 55 |
| 2018 | 5x114.3 | 56.1 | 55 |
| 2019 | 5x114.3 | 56.1 | 55 |
| 2020 | 5x114.3 | 56.1 | 55 |
| 2021 | 5x114.3 | 56.1 | 55 |
| 2022 | 5x114.3 | 56.1 | 55 |
| 2023 | 5x114.3 | 56.1 | 55 |
| 2024 | 5x114.3 | 56.1 | 55 |
| 2025 | 5x114.3 | 56.1 | 35-45 |
2014 Subaru Outback Wheel Interchange & Donor Fitment Guide (5x100)
The 5x100 bolt pattern is shared by 449 vehicles in our database (moderately common). For safe wheel swaps on the 2014 Subaru Outback, donor rims must match the 5x100 PCD and have a center bore of at least 56.1 mm:
DIRECT HUB MATCH Same 5x100 Pattern & Exact 56.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2005 Saab 9-2X | 56.1 mm (Exact) | 50 | N 12x1.25 (Cone) |
| 2013 Scion FR-S | 56.1 mm (Exact) | 48 | 12x1.25 (Cone) |
| 2003 Subaru Baja | 56.1 mm (Exact) | 48 | 12x1.25 (Cone) |
| 2013 Subaru BRZ | 56.1 mm (Exact) | 48 | N 12x1.25 (Cone) |
| 2016 Subaru Crosstrek | 56.1 mm (Exact) | 48 | 12x1.25 (Cone) |
| 1998 Subaru Forester | 56.1 mm (Exact) | 55 | N 12x1.25 (Cone) |
HUB RING FITMENT Same 5x100 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD β ID) | OEM Offset (ET) |
|---|---|---|---|
| 1993 Volkswagen Corrado | 57.1 mm | 57.1mm β 56.1mm |
30-40mm |
| 1992 Volkswagen Golf | 57.1 mm | 57.1mm β 56.1mm |
38 |
| 1999 Volkswagen Golf (New) | 57.1 mm | 57.1mm β 56.1mm |
38 |
| 1992 Volkswagen GTI | 57.1 mm | 57.1mm β 56.1mm |
38 |
| 1999 Volkswagen GTI (New) | 57.1 mm | 57.1mm β 56.1mm |
38 |
| 1992 Volkswagen Jetta | 57.1 mm | 57.1mm β 56.1mm |
38 |
Expert Buying Guide for 2014 Subaru Outback
For the 2014 Subaru Outback, the 5x100 bolt pattern and 56.1mm center bore are critical. Aftermarket wheels often have a larger bore; use hub-centric rings to prevent vibration and ensure load is on the hub, not the lugs. Offset should stay near 48mm; deviations affect scrub radius and may cause rubbing or poor handling. Always verify lug nut thread pitch (12x1.25) and seat typeβfactory uses conical (60-degree) seats. Using incorrect lug nuts can lead to wheel loosening. Cross-compatible with 2000β2015 Outback wheels; avoid 5x114.3 pattern wheels without adapters.
Historical Fitment Data Reference
In our dataset, Subaru Outback appears from 2000 to 2025 (26 model years). Across model years, this model appears with 2 bolt patterns (5x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 100.0 mm
Quick Tips & Safety Warnings
- β Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- β Check inner clearance for aftermarket wheels; strut clearance is tight with offsets below 45mm.
- β Use hub-centric rings even if wheels seem to center; steel wheels may require different lug nuts.
- β οΈ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- β οΈ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- β οΈ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
2014 Subaru Outback β Frequently Asked Questions
What is the bolt pattern for a 2014 Subaru Outback?
The 2014 Subaru Outback uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 48mm.
What other years of Subaru Outback have the same bolt pattern as the 2014?
The Subaru Outback uses the 5x100 pattern from 2000 through 2015. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
What is the PCD for a 2014 Subaru Outback?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2014 Outback, the PCD is 5x100.
What is the center bore of a 2014 Subaru Outback?
The factory center bore (hub bore) for the 2014 Subaru Outback is 56.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What does 48mm offset mean for the 2014 Outback?
An offset of 48mm means the wheel's mounting surface is 48mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Subaru.
Why is matching the 56.1mm center bore important for the 2014 Outback?
The 56.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need Full Fitment Data in Bulk?
Stop scraping or looking up cars one by one. Import 12,400+ verified vehicle specs (1992β2025) directly into your Shopify store, inventory system, or custom automotive software.
Explore Master Database (CSV) →