2006 Subaru Impreza Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2006 Subaru Impreza, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 55 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2006 Impreza — Year-Specific Fitment Context
The 2006 Subaru Impreza is in year 14 of 32 using the 5x100 pattern (1993–2024). Wheels from any 1993–2024 Subaru Impreza are cross-compatible with the 2006 model.
Subaru Impreza Bolt Pattern by Year
The table below shows how the Impreza's wheel specifications have changed over the years. The 2006 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1993 | 5x100 | 56.1 | 55 |
| 1994 | 5x100 | 56.1 | 55 |
| 1995 | 5x100 | 56.1 | 55 |
| 1996 | 5x100 | 56.1 | 55 |
| 1997 | 5x100 | 56.1 | 55 |
| 1998 | 5x100 | 56.1 | 55 |
| 1999 | 5x100 | 56.1 | 55 |
| 2000 | 5x100 | 56.1 | 55 |
| 2001 | 5x100 | 56.1 | 55 |
| 2002 | 5x100 | 56.1 | 55 |
| 2003 | 5x100 | 56.1 | 55 |
| 2004 | 5x100 | 56.1 | 55 |
| 2005 | 5x100 | 56.1 | 55 |
| ▸ 2006 | 5x100 | 56.1 | 55 |
| 2007 | 5x100 | 56.1 | 55 |
| 2008 | 5x100 | 56.1 | 55 |
| 2009 | 5x100 | 56.1 | 55 |
| 2010 | 5x100 | 56.1 | 55 |
| 2011 | 5x100 | 56.1 | 55 |
| 2012 | 5x100 | 56.1 | 55 |
| 2013 | 5x100 | 56.1 | 55 |
| 2014 | 5x100 | 56.1 | 55 |
| 2015 | 5x100 | 56.1 | 55 |
| 2016 | 5x100 | 56.1 | 55 |
| 2017 | 5x100 | 56.1 | 55 |
| 2018 | 5x100 | 56.1 | 48 |
| 2019 | 5x100 | 56.1 | 48 |
| 2020 | 5x100 | 56.1 | 48 |
| 2021 | 5x100 | 56.1 | 48 |
| 2022 | 5x100 | 56.1 | 48 |
| 2023 | 5x100 | 56.1 | 48 |
| 2024 | 5x100 | 56.1 | 48 |
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
Expert Buying Guide for 2006 Subaru Impreza
For your 2006 Subaru Impreza, the 5x100 bolt pattern and 56.1mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 55mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use the correct lug nuts: M12x1.25 thread pitch with a conical (60-degree) seat. Ball-seat lug nuts from other vehicles are unsafe. Re-torque after 50-100 miles. Avoid spacers unless hub-centric and properly installed.
Historical Fitment Data Reference
In our dataset, Subaru Impreza appears from 1993 to 2024 (32 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 7.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, ensure hub-centric rings are installed to match the 56.1mm bore.
- ✅ Check offset carefully: +48 to +55 is ideal; lower offsets may require fender rolling or camber adjustments.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2006 Subaru Impreza — Frequently Asked Questions
What is the bolt pattern for a 2006 Subaru Impreza?
The 2006 Subaru Impreza uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 55mm.
What other years of Subaru Impreza have the same bolt pattern as the 2006?
The Subaru Impreza uses the 5x100 pattern from 1993 through 2024. Wheels from any of these model years are dimensionally compatible with the 2006, provided the offset and center bore also match.
What is the center bore of a 2006 Subaru Impreza?
The factory center bore (hub bore) for the 2006 Subaru Impreza is 56.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I put aftermarket wheels on my 2006 Subaru Impreza?
Absolutely. Just ensure the aftermarket wheels have a 5x100 bolt pattern, an offset near 55mm, and a center bore of at least 56.1mm (using hub rings if larger).
Will wheels from another Subaru fit my 2006 Impreza?
Only if they share the exact same 5x100 bolt pattern, a compatible offset, and a center bore equal to or larger than 56.1mm.
How do I measure the bolt pattern on my 2006 Subaru?
The 2006 Impreza uses a 5x100 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset