2013 Subaru Impreza Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2013 Subaru Impreza, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 55 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2013 Impreza — Year-Specific Fitment Context
The 2013 Subaru Impreza is in year 21 of 32 using the 5x100 pattern (1993–2024). Wheels from any 1993–2024 Subaru Impreza are cross-compatible with the 2013 model.
Subaru Impreza Bolt Pattern by Year
The table below shows how the Impreza's wheel specifications have changed over the years. The 2013 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1993 | 5x100 | 56.1 | 55 |
| 1994 | 5x100 | 56.1 | 55 |
| 1995 | 5x100 | 56.1 | 55 |
| 1996 | 5x100 | 56.1 | 55 |
| 1997 | 5x100 | 56.1 | 55 |
| 1998 | 5x100 | 56.1 | 55 |
| 1999 | 5x100 | 56.1 | 55 |
| 2000 | 5x100 | 56.1 | 55 |
| 2001 | 5x100 | 56.1 | 55 |
| 2002 | 5x100 | 56.1 | 55 |
| 2003 | 5x100 | 56.1 | 55 |
| 2004 | 5x100 | 56.1 | 55 |
| 2005 | 5x100 | 56.1 | 55 |
| 2006 | 5x100 | 56.1 | 55 |
| 2007 | 5x100 | 56.1 | 55 |
| 2008 | 5x100 | 56.1 | 55 |
| 2009 | 5x100 | 56.1 | 55 |
| 2010 | 5x100 | 56.1 | 55 |
| 2011 | 5x100 | 56.1 | 55 |
| 2012 | 5x100 | 56.1 | 55 |
| ▸ 2013 | 5x100 | 56.1 | 55 |
| 2014 | 5x100 | 56.1 | 55 |
| 2015 | 5x100 | 56.1 | 55 |
| 2016 | 5x100 | 56.1 | 55 |
| 2017 | 5x100 | 56.1 | 55 |
| 2018 | 5x100 | 56.1 | 48 |
| 2019 | 5x100 | 56.1 | 48 |
| 2020 | 5x100 | 56.1 | 48 |
| 2021 | 5x100 | 56.1 | 48 |
| 2022 | 5x100 | 56.1 | 48 |
| 2023 | 5x100 | 56.1 | 48 |
| 2024 | 5x100 | 56.1 | 48 |
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
Expert Buying Guide for 2013 Subaru Impreza
For your 2013 Subaru Impreza, the 5x100 bolt pattern and 56.1mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load transfer. The factory offset is 55mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use the correct lug nuts: M12x1.25 thread pitch with a conical (60-degree) seat. Ball-seat lug nuts from other vehicles can loosen or damage the wheel. Re-torque after 50-100 miles of driving. Avoid wheels with a center bore smaller than 56.1mm, as they won't fit over the hub.
Historical Fitment Data Reference
In our dataset, Subaru Impreza appears from 1993 to 2024 (32 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 7.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving to ensure proper seating.
- ✅ If using aftermarket wheels, verify hub-centric ring inner diameter matches 56.1mm and outer diameter matches the wheel's bore.
- ✅ Check offset carefully: 55mm is optimal; lower offsets (e.g., 45mm) may cause tire rub on fenders, especially with wider tires.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2013 Subaru Impreza — Frequently Asked Questions
What is the bolt pattern for a 2013 Subaru Impreza?
The 2013 Subaru Impreza uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 55mm.
What other years of Subaru Impreza have the same bolt pattern as the 2013?
The Subaru Impreza uses the 5x100 pattern from 1993 through 2024. Wheels from any of these model years are dimensionally compatible with the 2013, provided the offset and center bore also match.
What does 55mm offset mean for the 2013 Impreza?
An offset of 55mm means the wheel's mounting surface is 55mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Subaru.
What is the PCD for a 2013 Subaru Impreza?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2013 Impreza, the PCD is 5x100.
How tight should I torque the lug nuts on a 2013 Subaru Impreza?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 2013 Subaru Impreza?
The factory center bore (hub bore) for the 2013 Subaru Impreza is 56.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset