2026 Subaru Impreza Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Subaru Impreza is 5x114.3 (5x4.5"). It has a center bore of 56.1 mm, an offset range of 48-55, and utilizes 12x1.25 (Flat seat, 21mm hex) fasteners tightened to 89 ft-lbs (120 Nm).
2026 Subaru Impreza Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 56.1 mm |
| Offset Range (ET) | 48-55 |
| Thread Size (Lug Nut / Bolt) | 12x1.25 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 89 ft-lbs (120 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2026 Impreza — Year-Specific Fitment Context
The 2026 model year is the final year of the Subaru Impreza's 5x114.3 bolt pattern run (since 2024). Wheels from any 2024–2026 Subaru Impreza are cross-compatible with the 2026 model. Across its full production run (1993–2026), the Impreza has also used: 5x100.
Subaru Impreza Bolt Pattern by Year
Looking for all generations? View the complete Subaru Impreza (1993–2026) Bolt Pattern & Generation Guide →
The table below shows how the Impreza's wheel specifications have changed over the years. The 2026 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1993 | 5x100 | 56.1 | 55 |
| 1994 | 5x100 | 56.1 | 55 |
| 1995 | 5x100 | 56.1 | 55 |
| 1996 | 5x100 | 56.1 | 55 |
| 1997 | 5x100 | 56.1 | 55 |
| 1998 | 5x100 | 56.1 | 55 |
| 1999 | 5x100 | 56.1 | 55 |
| 2000 | 5x100 | 56.1 | 55 |
| 2001 | 5x100 | 56.1 | 55 |
| 2002 | 5x100 | 56.1 | 55 |
| 2003 | 5x100 | 56.1 | 55 |
| 2004 | 5x100 | 56.1 | 55 |
| 2005 | 5x100 | 56.1 | 55 |
| 2006 | 5x100 | 56.1 | 55 |
| 2007 | 5x100 | 56.1 | 55 |
| 2008 | 5x100 | 56.1 | 55 |
| 2009 | 5x100 | 56.1 | 55 |
| 2010 | 5x100 | 56.1 | 55 |
| 2011 | 5x100 | 56.1 | 55 |
| 2012 | 5x100 | 56.1 | 55 |
| 2013 | 5x100 | 56.1 | 55 |
| 2014 | 5x100 | 56.1 | 55 |
| 2015 | 5x100 | 56.1 | 55 |
| 2016 | 5x100 | 56.1 | 55 |
| 2017 | 5x100 | 56.1 | 55 |
| 2018 | 5x100 | 56.1 | 48 |
| 2019 | 5x100 | 56.1 | 48 |
| 2020 | 5x100 | 56.1 | 48 |
| 2021 | 5x100 | 56.1 | 48 |
| 2022 | 5x100 | 56.1 | 48 |
| 2023 | 5x100 | 56.1 | 48 |
| 2024 | 5x114.3 | 56.1 | 48 |
| 2025 | 5x114.3 | 56.1 | 48-55 |
| ▸ 2026 | 5x114.3 | 56.1 | 48-55 |
2026 Subaru Impreza Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 Subaru Impreza, donor rims must match the 5x114.3 PCD and have a center bore of at least 56.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 56.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 Subaru Ascent | 56.1 mm (Exact) | 45-55 | 12x1.25 (Flat) |
| 2024 Subaru Crosstrek | 56.1 mm (Exact) | 48 | 12x1.25 (Cone) |
| 2019 Subaru Forester | 56.1 mm (Exact) | 55 | 12x1.25 (Cone) |
| 2016 Subaru Legacy | 56.1 mm (Exact) | 55 | 12x1.25 (Cone) |
| 2016 Subaru Outback | 56.1 mm (Exact) | 55 | N 12x1.25 (Cone) |
| 2025 Subaru WRX | 56.1 mm (Exact) | 45-55 | 12x1.25 (Flat) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2025 Kia EV9 | 67.1 mm | 67.1mm → 56.1mm |
35-45 |
| 2024 Kia Forte | 67.1 mm | 67.1mm → 56.1mm |
35-50 |
| 2016 Kia Forte Koup | 67.1 mm | 67.1mm → 56.1mm |
35-50 |
| 2018 Kia Forte5 | 67.1 mm | 67.1mm → 56.1mm |
35-50 |
| 2025 Kia K4 | 67.1 mm | 67.1mm → 56.1mm |
40-50 |
| 2025 Kia K5 | 67.1 mm | 67.1mm → 56.1mm |
45-50 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 89 ft-lbs (120 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Subaru Impreza — Frequently Asked Questions
What is the bolt pattern for a 2026 Subaru Impreza?
The 2026 Subaru Impreza uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 48-55mm.
What other years of Subaru Impreza have the same bolt pattern as the 2026?
The Subaru Impreza uses the 5x114.3 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
What is the factory wheel offset for a 2026 Subaru Impreza?
The OEM offset for the 2026 Impreza is typically around 48-55mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Why is matching the 56.1mm center bore important for the 2026 Impreza?
The 56.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How tight should I torque the lug nuts on a 2026 Subaru Impreza?
Refer to your owner's manual for exact specs, but always tighten the 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What lug nut size does the 2026 Subaru Impreza use?
The 2026 Subaru Impreza uses 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →