2025 Subaru Ascent Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Subaru Ascent is 5x114.3 (5x4.5"). It has a center bore of 56.1 mm, an offset range of 45-55, and utilizes 12x1.25 (Flat seat, 21mm hex) fasteners tightened to 89 ft-lbs (120 Nm).
2025 Subaru Ascent Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 56.1 mm |
| Offset Range (ET) | 45-55 |
| Thread Size (Lug Nut / Bolt) | 12x1.25 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 89 ft-lbs (120 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2025 Ascent — Year-Specific Fitment Context
The 2025 Subaru Ascent is in year 7 of 8 using the 5x114.3 pattern (2019–2026). Wheels from any 2019–2026 Subaru Ascent are cross-compatible with the 2025 model.
Subaru Ascent Bolt Pattern by Year
Looking for all generations? View the complete Subaru Ascent (2019–2026) Bolt Pattern & Generation Guide →
The table below shows how the Ascent's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Subaru Ascent Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2025 Subaru Ascent, donor rims must match the 5x114.3 PCD and have a center bore of at least 56.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 56.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2024 Subaru Crosstrek | 56.1 mm (Exact) | 48 | 12x1.25 (Cone) |
| 2019 Subaru Forester | 56.1 mm (Exact) | 55 | 12x1.25 (Cone) |
| 2024 Subaru Impreza | 56.1 mm (Exact) | 48 | 12x1.25 (Cone) |
| 2016 Subaru Legacy | 56.1 mm (Exact) | 55 | 12x1.25 (Cone) |
| 2016 Subaru Outback | 56.1 mm (Exact) | 55 | N 12x1.25 (Cone) |
| 2025 Subaru WRX | 56.1 mm (Exact) | 45-55 | 12x1.25 (Flat) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2023 Nissan Ariya | 66.1 mm | 66.1mm → 56.1mm |
35-45mm |
| 2024 Nissan Ariya Hatchback | 66.1 mm | 66.1mm → 56.1mm |
40-45 |
| 2025 Nissan Ariya MPV | 66.1 mm | 66.1mm → 56.1mm |
40-45 |
| 2017 Nissan Armada | 66.1 mm | 66.1mm → 56.1mm |
25 |
| 2024 Nissan GT-R | 66.1 mm | 66.1mm → 56.1mm |
35-45mm |
| 2017 Nissan JUKE | 66.1 mm | 66.1mm → 56.1mm |
40 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 89 ft-lbs (120 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Subaru Ascent — Frequently Asked Questions
What is the bolt pattern for a 2025 Subaru Ascent?
The 2025 Subaru Ascent uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 45-55mm.
What other years of Subaru Ascent have the same bolt pattern as the 2025?
The Subaru Ascent uses the 5x114.3 pattern from 2019 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2025 Subaru Ascent?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 45-55mm, and a center bore of at least 56.1mm (using hub rings if larger).
Do 2025 Subaru Ascents use lug bolts or lug nuts?
The 2025 Ascent requires 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2025 Subaru Ascent?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2025 Ascent, the PCD is 5x114.3.
What is the factory wheel offset for a 2025 Subaru Ascent?
The OEM offset for the 2025 Ascent is typically around 45-55mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →