2024 Nissan GT-R Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Nissan GT-R, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | M12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2024 GT-R — Year-Specific Fitment Context
The 2024 model year is the final year of the Nissan GT-R's 5x114.3 bolt pattern run (since 2009). Wheels from any 2009–2024 Nissan GT-R are cross-compatible with the 2024 model.
Nissan GT-R Bolt Pattern by Year
The table below shows how the GT-R's wheel specifications have changed over the years. The 2024 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2009 | 5x114.3 | 66.1 | 44 |
| 2010 | 5x114.3 | 66.1 | 44 |
| 2011 | 5x114.3 | 66.1 | 44 |
| 2012 | 5x114.3 | 66.1 | 44 |
| 2013 | 5x114.3 | 66.1 | 44 |
| 2014 | 5x114.3 | 66.1 | 44 |
| 2015 | 5x114.3 | 66.1 | 44 |
| 2016 | 5x114.3 | 66.1 | 44 |
| 2017 | 5x114.3 | 66.1 | 44 |
| 2018 | 5x114.3 | 66.1 | 35-45mm |
| 2019 | 5x114.3 | 66.1 | 35-45mm |
| 2020 | 5x114.3 | 66.1 | 35-45mm |
| 2021 | 5x114.3 | 66.1 | 35-45mm |
| ▸ 2024 | 5x114.3 | 66.1 | 35-45mm |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2024 Nissan GT-R
For the 2024 Nissan GT-R, the correct center bore is 66.1mm. Aftermarket wheels with a larger bore require hub-centric rings to prevent vibrations and ensure proper load transfer. The offset range is 35-45mm; straying outside this can cause rubbing or clearance issues with the brake calipers. Always use lug nuts with M12x1.25 thread pitch and the correct seat type (cone or ball) to avoid wheel loosening. Wheels from 2009–2024 GT-R models are cross-compatible, but verify offset and bore. Safety first: improper fitment compromises handling and can lead to wheel detachment.
Historical Fitment Data Reference
In our dataset, Nissan GT-R appears from 2009 to 2024 (14 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 89.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for settling.
- ✅ Avoid using universal fit wheels without hub-centric rings; the GT-R is sensitive to centering.
- ✅ Check brake caliper clearance with the inner barrel of the wheel, especially with offsets near 35mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Nissan GT-R — Frequently Asked Questions
What is the bolt pattern for a 2024 Nissan GT-R?
The 2024 Nissan GT-R uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 35-45mmmm.
What other years of Nissan GT-R have the same bolt pattern as the 2024?
The Nissan GT-R uses the 5x114.3 pattern from 2009 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
What lug nut size does the 2024 Nissan GT-R use?
The 2024 Nissan GT-R uses M12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the PCD for a 2024 Nissan GT-R?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2024 GT-R, the PCD is 5x114.3.
How do I measure the bolt pattern on my 2024 Nissan?
The 2024 GT-R uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What does 35-45mmmm offset mean for the 2024 GT-R?
An offset of 35-45mmmm means the wheel's mounting surface is 35-45mmmm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Nissan.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset