2016 Nissan GT-R Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2016 Nissan GT-R, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 44 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2016 GT-R — Year-Specific Fitment Context
The 2016 Nissan GT-R is in year 8 of 16 using the 5x114.3 pattern (2009–2024). Wheels from any 2009–2024 Nissan GT-R are cross-compatible with the 2016 model.
Nissan GT-R Bolt Pattern by Year
The table below shows how the GT-R's wheel specifications have changed over the years. The 2016 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2009 | 5x114.3 | 66.1 | 44 |
| 2010 | 5x114.3 | 66.1 | 44 |
| 2011 | 5x114.3 | 66.1 | 44 |
| 2012 | 5x114.3 | 66.1 | 44 |
| 2013 | 5x114.3 | 66.1 | 44 |
| 2014 | 5x114.3 | 66.1 | 44 |
| 2015 | 5x114.3 | 66.1 | 44 |
| ▸ 2016 | 5x114.3 | 66.1 | 44 |
| 2017 | 5x114.3 | 66.1 | 44 |
| 2018 | 5x114.3 | 66.1 | 35-45mm |
| 2019 | 5x114.3 | 66.1 | 35-45mm |
| 2020 | 5x114.3 | 66.1 | 35-45mm |
| 2021 | 5x114.3 | 66.1 | 35-45mm |
| 2024 | 5x114.3 | 66.1 | 35-45mm |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2016 Nissan GT-R
For the 2016 Nissan GT-R, the 66.1mm center bore is critical; aftermarket wheels with a larger bore require hub-centric rings to prevent vibration. The offset is sensitive—stick to 44mm ±5mm to avoid rubbing or clearance issues with the Brembo brakes. Always use lug nuts with the correct thread pitch (12x1.25) and proper seat type (cone or ball seat, depending on the wheel). Mismatched lug nuts can cause wheel loosening or damage. Verify that aftermarket wheels are load-rated for the GT-R's weight and power. Wheels from 2009–2024 GT-Rs are direct fit, but always test fitment before final installation.
Historical Fitment Data Reference
In our dataset, Nissan GT-R appears from 2009 to 2024 (14 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 89.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid spacers unless necessary; if used, ensure they are hub-centric and do not exceed 5mm to maintain offset.
- ✅ Check brake caliper clearance: some aftermarket wheels may require spacers or different offsets to clear the large Brembo calipers.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2016 Nissan GT-R — Frequently Asked Questions
What is the bolt pattern for a 2016 Nissan GT-R?
The 2016 Nissan GT-R uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 44mm.
What other years of Nissan GT-R have the same bolt pattern as the 2016?
The Nissan GT-R uses the 5x114.3 pattern from 2009 through 2024. Wheels from any of these model years are dimensionally compatible with the 2016, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2016 Nissan GT-R?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 44mm, and a center bore of at least 66.1mm (using hub rings if larger).
How do I measure the bolt pattern on my 2016 Nissan?
The 2016 GT-R uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I use spacers on my 2016 Nissan GT-R?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.25 hardware.
Why is matching the 66.1mm center bore important for the 2016 GT-R?
The 66.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset