2021 Nissan GT-R Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2021 Nissan GT-R, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | M12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
2021 GT-R — Year-Specific Fitment Context
The 2021 Nissan GT-R is in year 13 of 16 using the 5x114.3 pattern (2009–2024). Wheels from any 2009–2024 Nissan GT-R are cross-compatible with the 2021 model.
Nissan GT-R Bolt Pattern by Year
The table below shows how the GT-R's wheel specifications have changed over the years. The 2021 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2009 | 5x114.3 | 66.1 | 44 |
| 2010 | 5x114.3 | 66.1 | 44 |
| 2011 | 5x114.3 | 66.1 | 44 |
| 2012 | 5x114.3 | 66.1 | 44 |
| 2013 | 5x114.3 | 66.1 | 44 |
| 2014 | 5x114.3 | 66.1 | 44 |
| 2015 | 5x114.3 | 66.1 | 44 |
| 2016 | 5x114.3 | 66.1 | 44 |
| 2017 | 5x114.3 | 66.1 | 44 |
| 2018 | 5x114.3 | 66.1 | 35-45mm |
| 2019 | 5x114.3 | 66.1 | 35-45mm |
| 2020 | 5x114.3 | 66.1 | 35-45mm |
| ▸ 2021 | 5x114.3 | 66.1 | 35-45mm |
| 2024 | 5x114.3 | 66.1 | 35-45mm |
Fitment Notes
The 2021 Nissan GT-R has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Nissan GT-R appears from 2009 to 2024 (14 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 89.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
2021 Nissan GT-R — Frequently Asked Questions
What is the bolt pattern for a 2021 Nissan GT-R?
The 2021 Nissan GT-R uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 35-45mmmm.
What other years of Nissan GT-R have the same bolt pattern as the 2021?
The Nissan GT-R uses the 5x114.3 pattern from 2009 through 2024. Wheels from any of these model years are dimensionally compatible with the 2021, provided the offset and center bore also match.
What does 35-45mmmm offset mean for the 2021 GT-R?
An offset of 35-45mmmm means the wheel's mounting surface is 35-45mmmm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Nissan.
What is the factory wheel offset for a 2021 Nissan GT-R?
The OEM offset for the 2021 GT-R is typically around 35-45mmmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 2021 Nissan?
The 2021 GT-R uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2021 Nissan GT-R?
The factory center bore (hub bore) for the 2021 Nissan GT-R is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Nissan GT-R is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2009-2024 (14 model years).
- Observed bolt-pattern variants: 1 (5x114.3).
- Observed total offset span across years: 89.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 2.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2021 Nissan GT-R, please report it via our About page contact so we can verify and update this record.