2020 Nissan GT-R Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Nissan GT-R, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | M12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2020 GT-R — Year-Specific Fitment Context
The 2020 Nissan GT-R is in year 12 of 16 using the 5x114.3 pattern (2009–2024). Wheels from any 2009–2024 Nissan GT-R are cross-compatible with the 2020 model.
Nissan GT-R Bolt Pattern by Year
The table below shows how the GT-R's wheel specifications have changed over the years. The 2020 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2009 | 5x114.3 | 66.1 | 44 |
| 2010 | 5x114.3 | 66.1 | 44 |
| 2011 | 5x114.3 | 66.1 | 44 |
| 2012 | 5x114.3 | 66.1 | 44 |
| 2013 | 5x114.3 | 66.1 | 44 |
| 2014 | 5x114.3 | 66.1 | 44 |
| 2015 | 5x114.3 | 66.1 | 44 |
| 2016 | 5x114.3 | 66.1 | 44 |
| 2017 | 5x114.3 | 66.1 | 44 |
| 2018 | 5x114.3 | 66.1 | 35-45mm |
| 2019 | 5x114.3 | 66.1 | 35-45mm |
| ▸ 2020 | 5x114.3 | 66.1 | 35-45mm |
| 2021 | 5x114.3 | 66.1 | 35-45mm |
| 2024 | 5x114.3 | 66.1 | 35-45mm |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2020 Nissan GT-R
The 2020 Nissan GT-R uses a 5x114.3 bolt pattern with a 66.1mm center bore. Aftermarket wheels must use hub-centric rings to ensure proper load distribution and prevent vibrations. Offset is critical: the factory range is 35-45mm. Straying outside this range can cause rubbing or clearance issues with the wide fenders and Brembo brakes. Always use M12x1.25 lug nuts with the correct seat type—factory wheels use a tapered cone seat, while aftermarket wheels may require ball or conical seats. Never mix seat types; improper lug nut engagement can lead to wheel loss. Verify lug nut torque to 80-90 ft-lbs and re-torque after 50 miles.
Historical Fitment Data Reference
In our dataset, Nissan GT-R appears from 2009 to 2024 (14 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 89.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50 miles of driving to account for wheel settling.
- ✅ When using aftermarket wheels, always confirm hub-centric ring inner diameter matches 66.1mm to avoid vibrations.
- ✅ Check brake caliper clearance: some aftermarket wheels may require spacers to clear the GT-R's large Brembo brakes.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2020 Nissan GT-R — Frequently Asked Questions
What is the bolt pattern for a 2020 Nissan GT-R?
The 2020 Nissan GT-R uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 35-45mmmm.
What other years of Nissan GT-R have the same bolt pattern as the 2020?
The Nissan GT-R uses the 5x114.3 pattern from 2009 through 2024. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2020 Nissan?
The 2020 GT-R uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Why is matching the 66.1mm center bore important for the 2020 GT-R?
The 66.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Will wheels from another Nissan fit my 2020 GT-R?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.1mm.
Can I use spacers on my 2020 Nissan GT-R?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your M12x1.25 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset