2010 Nissan GT-R Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Nissan GT-R, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 44 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2010 GT-R — Year-Specific Fitment Context
The 2010 Nissan GT-R is in year 2 of 16 using the 5x114.3 pattern (2009–2024). Wheels from any 2009–2024 Nissan GT-R are cross-compatible with the 2010 model.
Nissan GT-R Bolt Pattern by Year
The table below shows how the GT-R's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2009 | 5x114.3 | 66.1 | 44 |
| ▸ 2010 | 5x114.3 | 66.1 | 44 |
| 2011 | 5x114.3 | 66.1 | 44 |
| 2012 | 5x114.3 | 66.1 | 44 |
| 2013 | 5x114.3 | 66.1 | 44 |
| 2014 | 5x114.3 | 66.1 | 44 |
| 2015 | 5x114.3 | 66.1 | 44 |
| 2016 | 5x114.3 | 66.1 | 44 |
| 2017 | 5x114.3 | 66.1 | 44 |
| 2018 | 5x114.3 | 66.1 | 35-45mm |
| 2019 | 5x114.3 | 66.1 | 35-45mm |
| 2020 | 5x114.3 | 66.1 | 35-45mm |
| 2021 | 5x114.3 | 66.1 | 35-45mm |
| 2024 | 5x114.3 | 66.1 | 35-45mm |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2010 Nissan GT-R
The 2010 Nissan GT-R uses a 5x114.3 bolt pattern with a 66.1mm center bore. When selecting aftermarket wheels, hub-centric rings are mandatory to ensure proper load distribution and prevent vibrations. The factory offset is 44mm; deviations beyond ±5mm may cause rubbing or clearance issues with the Brembo brakes. Always verify lug nut compatibility: the GT-R requires 12x1.25 thread pitch with a 60-degree conical seat. Using incorrect lug nuts (e.g., ball seat or wrong thread) can lead to wheel detachment. For safety, re-torque lug nuts after 50-100 miles of driving. Note that wheels from any 2009–2024 GT-R are cross-compatible.
Historical Fitment Data Reference
In our dataset, Nissan GT-R appears from 2009 to 2024 (14 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 89.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ Avoid wheels with offset below 40mm to prevent fender rubbing.
- ✅ Always use hub-centric rings with aftermarket wheels to eliminate vibrations.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Nissan GT-R — Frequently Asked Questions
What is the bolt pattern for a 2010 Nissan GT-R?
The 2010 Nissan GT-R uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 44mm.
What other years of Nissan GT-R have the same bolt pattern as the 2010?
The Nissan GT-R uses the 5x114.3 pattern from 2009 through 2024. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
Do 2010 Nissan GT-Rs use lug bolts or lug nuts?
The 2010 GT-R requires N 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How do I measure the bolt pattern on my 2010 Nissan?
The 2010 GT-R uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the PCD for a 2010 Nissan GT-R?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2010 GT-R, the PCD is 5x114.3.
What is the center bore of a 2010 Nissan GT-R?
The factory center bore (hub bore) for the 2010 Nissan GT-R is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset