2025 Ferrari Daytona SP3 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2025 Ferrari Daytona SP3, along with offset and center bore data.
2025 Ferrari Daytona SP3 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | Not Applicable |
| Torque Specs | Not Applicable |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2025 Daytona SP3 — Year-Specific Fitment Context
The 2025 model year is the final year of the Ferrari Daytona SP3's 5x114.3 bolt pattern run (since 2024). Wheels from any 2024–2025 Ferrari Daytona SP3 are cross-compatible with the 2025 model.
Ferrari Daytona SP3 Bolt Pattern by Year
The table below shows how the Daytona SP3's wheel specifications have changed over the years. The 2025 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2024 | 5x114.3 | 67.1 | Not Applicable |
| ▸ 2025 | 5x114.3 | 67.1 | Not Applicable |
5x114.3 Pattern Context
This bolt pattern appears on 3207 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to Not Applicable, then re-check torque after 50-100 km (30-60 miles).
2025 Ferrari Daytona SP3 — Frequently Asked Questions
What is the bolt pattern for a 2025 Ferrari Daytona SP3?
The 2025 Ferrari Daytona SP3 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is Not Applicablemm.
What other years of Ferrari Daytona SP3 have the same bolt pattern as the 2025?
The Ferrari Daytona SP3 uses the 5x114.3 pattern from 2024 through 2025. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
What lug nut size does the 2025 Ferrari Daytona SP3 use?
The 2025 Ferrari Daytona SP3 uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How do I measure the bolt pattern on my 2025 Ferrari?
The 2025 Daytona SP3 uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What does Not Applicablemm offset mean for the 2025 Daytona SP3?
An offset of Not Applicablemm means the wheel's mounting surface is Not Applicablemm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ferrari.
What is the center bore of a 2025 Ferrari Daytona SP3?
The factory center bore (hub bore) for the 2025 Ferrari Daytona SP3 is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset