2024 Ferrari Daytona SP3 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2024 Ferrari Daytona SP3 is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of Not Applicable, and utilizes 14x1.5 (Ball seat) fasteners tightened to Not Applicable.
2024 Ferrari Daytona SP3 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 67.1 mm |
| Offset Range (ET) | Not Applicable |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Wheel Torque Specs | Not Applicable |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2024 Daytona SP3 — Year-Specific Fitment Context
The 2024 model year marks the beginning of the Ferrari Daytona SP3's 5x114.3 bolt pattern era, which continued through 2026 (3 consecutive years). Wheels from any 2024–2026 Ferrari Daytona SP3 are cross-compatible with the 2024 model.
Ferrari Daytona SP3 Bolt Pattern by Year
Looking for all generations? View the complete Ferrari Daytona SP3 (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the Daytona SP3's wheel specifications have changed over the years. The 2024 model year is highlighted.
2024 Ferrari Daytona SP3 Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2024 Ferrari Daytona SP3, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2024 Aston Martin DB11 | 67.1 mm (Exact) | 35-45mm | 14x1.5 (Ball) |
| 2010 Dodge Avenger | 67.1 mm (Exact) | 42 | N 12x1.50 (Cone) |
| 2000 Dodge Stratus | 67.1 mm (Exact) | 41 | N 12x1.50 (Cone) |
| 2025 Ferrari 12Cilindri | 67.1 mm (Exact) | Not Applicable | 14x1.5 (Ball) |
| 2025 Ferrari 296 | 67.1 mm (Exact) | Not Applicable | 14x1.5 (Ball) |
| 2022 Ferrari 296 GTB | 67.1 mm (Exact) | 45 | 14x1.5 (Ball) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2015 Aston Martin DB9 | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
| 2016 Aston Martin DB9 GT | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
| 2021 Aston Martin DBS Superleggera | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
| 2025 Aston Martin DBX | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
| 2018 Aston Martin Vanquish S | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
| 1993 Chrysler New Yorker | 71.6 mm | 71.6mm → 67.1mm |
40 |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to Not Applicable, then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Ferrari Daytona SP3 — Frequently Asked Questions
What is the bolt pattern for a 2024 Ferrari Daytona SP3?
The 2024 Ferrari Daytona SP3 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is Not Applicablemm.
What other years of Ferrari Daytona SP3 have the same bolt pattern as the 2024?
The Ferrari Daytona SP3 uses the 5x114.3 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2024 Ferrari Daytona SP3?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near Not Applicablemm, and a center bore of at least 67.1mm (using hub rings if larger).
What is the factory wheel offset for a 2024 Ferrari Daytona SP3?
The OEM offset for the 2024 Daytona SP3 is typically around Not Applicablemm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Will wheels from another Ferrari fit my 2024 Daytona SP3?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
What does Not Applicablemm offset mean for the 2024 Daytona SP3?
An offset of Not Applicablemm means the wheel's mounting surface is Not Applicablemm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ferrari.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →