2026 Ferrari Daytona SP3 Bolt Pattern

Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Ferrari Daytona SP3 is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of Not Applicable, and utilizes 14x1.5 (Ball seat) fasteners tightened to Not Applicable.

2026 Ferrari Daytona SP3 Wheel Fitment Specs

Bolt Pattern (Lug Pattern) 5x114.3 (5x4.5")
Center Bore (Hub Bore) 67.1 mm
Offset Range (ET) Not Applicable
Thread Size (Lug Nut / Bolt) 14x1.5
Fastener Seat Type Radius / Spherical (Ball Seat)
Wheel Torque Specs Not Applicable
💡

Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.

🛠️ Managing a shop, wheel inventory, or app? Stop searching one by one.
Download 12,902 Vehicle Database (CSV) →
🔍 Check fitment for other vehicles using our Ultimate Bolt Pattern Finder tool →

2026 Daytona SP3 — Year-Specific Fitment Context

The 2026 model year is the final year of the Ferrari Daytona SP3's 5x114.3 bolt pattern run (since 2024). Wheels from any 2024–2026 Ferrari Daytona SP3 are cross-compatible with the 2026 model.

Ferrari Daytona SP3 Bolt Pattern by Year

Looking for all generations? View the complete Ferrari Daytona SP3 (2024–2026) Bolt Pattern & Generation Guide →

The table below shows how the Daytona SP3's wheel specifications have changed over the years. The 2026 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2024 5x114.3 67.1 Not Applicable
2025 5x114.3 67.1 Not Applicable
▸ 2026 5x114.3 67.1 Not Applicable

2026 Ferrari Daytona SP3 Wheel Interchange & Donor Fitment Guide (5x114.3)

The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 Ferrari Daytona SP3, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:

DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)

Compatible Donor Vehicle Center Bore OEM Offset (ET) Lug Thread & Seat
2022 Hyundai Accent 67.1 mm (Exact) 35-50 12x1.5 (Cone)
2017 Hyundai Azera 67.1 mm (Exact) 35-50 12x1.5 (Cone)
2008 Hyundai Elantra 67.1 mm (Exact) 35-50 12x1.5 (Cone)
2020 Hyundai Elantra GT 67.1 mm (Exact) 35-50 12x1.5 (Cone)
2025 Hyundai Elantra Hybrid 67.1 mm (Exact) 35-50 12x1.5 (Cone)
2025 Hyundai Elantra N 67.1 mm (Exact) 55 12x1.5 (Ball)

HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)

Donor Vehicle Donor Bore Required Hub Ring (OD → ID) OEM Offset (ET)
1997 Jeep Wrangler 71.6 mm 71.6mm → 67.1mm 25
2024 Lincoln Aviator 70.5 mm 70.5mm → 67.1mm 50
1994 Lincoln Continental 70.3 mm 70.3mm → 67.1mm 40
1993 Lincoln Town Car 70.3 mm 70.3mm → 67.1mm 10
2018 Lotus Evora 400 68.1 mm 68.1mm → 67.1mm 52 front, 69 rear
2021 Lotus Evora GT 68.0 mm 68.0mm → 67.1mm 50-60mm
Looking for all models? View the complete directory of vehicles with 5x114.3 bolt pattern →

Quick Tips & Safety Warnings

Ready to upgrade or perform maintenance?

🛒 Shop Tools & Accessories on Amazon

As an Amazon Associate, I earn from qualifying purchases.

2026 Ferrari Daytona SP3 — Frequently Asked Questions

What is the bolt pattern for a 2026 Ferrari Daytona SP3?

The 2026 Ferrari Daytona SP3 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is Not Applicablemm.

What other years of Ferrari Daytona SP3 have the same bolt pattern as the 2026?

The Ferrari Daytona SP3 uses the 5x114.3 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.

What lug nut size does the 2026 Ferrari Daytona SP3 use?

The 2026 Ferrari Daytona SP3 uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.

How do I measure the bolt pattern on my 2026 Ferrari?

The 2026 Daytona SP3 uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.

What does Not Applicablemm offset mean for the 2026 Daytona SP3?

An offset of Not Applicablemm means the wheel's mounting surface is Not Applicablemm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ferrari.

What is the factory wheel offset for a 2026 Ferrari Daytona SP3?

The OEM offset for the 2026 Daytona SP3 is typically around Not Applicablemm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

For Tire & Wheel Shops, Shopify Stores & Developers

Running a Tire Shop or Wheel Store?

Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.

Get Master Spreadsheet (CSV) →
Confidence Level
Medium
Verified Source
Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last Updated
2026-11-18

Ferrari Daytona SP3 By Year

2024 2025 2026

Other Ferrari Models

12Cilindri 296 296 GTB 430 Scuderia 458 Speciale 488 GTB 488 Pista 599 GTB Fiorano 599 GTO 612 Scaglietti 812 Competizione 812 Competizione A Daytona SP3 F12berlinetta F8 FF Portofino Purosangue Roma SF90

Popular Vehicle Fitment

▶ Ford Mustang Specs ▶ Chevy Tahoe Specs ▶ Honda Civic Specs ▶ Ford F-150 Specs ▶ Toyota Camry Specs

Common Bolt Patterns

▶ 5x114.3 (5x4.5") ▶ 6x139.7 (6x5.5") ▶ 5x120 ▶ 5x127 (5x5") ▶ 5x112 (European)