2026 MAZDA CX-30 Bolt Pattern

Quick Answer: The factory bolt pattern (lug pattern) for a 2026 MAZDA CX-30 is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of 45-50, and utilizes 12x1.5 (Flat seat, 21mm hex) fasteners tightened to 80-87 ft-lbs (108-118 Nm).

2026 MAZDA CX-30 Wheel Fitment Specs

Bolt Pattern (Lug Pattern) 5x114.3 (5x4.5")
Center Bore (Hub Bore) 67.1 mm
Offset Range (ET) 45-50
Thread Size (Lug Nut / Bolt) 12x1.5
Fastener Seat Type Flat / Mag Seat (Washer)
Lug Wrench / Socket Hex Size 21mm
Wheel Torque Specs 80-87 ft-lbs (108-118 Nm)
💡

Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.

🛠️ Managing a shop, wheel inventory, or app? Stop searching one by one.
Download 12,902 Vehicle Database (CSV) →
🔍 Check fitment for other vehicles using our Ultimate Bolt Pattern Finder tool →

2026 CX-30 — Year-Specific Fitment Context

The 2026 model year is the final year of the MAZDA CX-30's 5x114.3 bolt pattern run (since 2020). Wheels from any 2020–2026 MAZDA CX-30 are cross-compatible with the 2026 model.

MAZDA CX-30 Bolt Pattern by Year

Looking for all generations? View the complete MAZDA CX-30 (2020–2026) Bolt Pattern & Generation Guide →

The table below shows how the CX-30's wheel specifications have changed over the years. The 2026 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2020 5x114.3 67.1 45-50
2021 5x114.3 67.1 45-50
2022 5x114.3 67.1 45-50
2023 5x114.3 67.1 45-50
2024 5x114.3 67.1 45-50
2025 5x114.3 67.1 45-50
▸ 2026 5x114.3 67.1 45-50

2026 MAZDA CX-30 Wheel Interchange & Donor Fitment Guide (5x114.3)

The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 MAZDA CX-30, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:

DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)

Compatible Donor Vehicle Center Bore OEM Offset (ET) Lug Thread & Seat
2024 Aston Martin DB11 67.1 mm (Exact) 35-45mm 14x1.5 (Ball)
2008 Aston Martin Vantage 67.1 mm (Exact) 50 B 14x2.00 (Cone)
2010 Dodge Avenger 67.1 mm (Exact) 42 N 12x1.50 (Cone)
2000 Dodge Stratus 67.1 mm (Exact) 41 N 12x1.50 (Cone)
2025 Ferrari 12Cilindri 67.1 mm (Exact) Not Applicable 14x1.5 (Ball)
2025 Ferrari 296 67.1 mm (Exact) Not Applicable 14x1.5 (Ball)

HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)

Donor Vehicle Donor Bore Required Hub Ring (OD → ID) OEM Offset (ET)
2015 Aston Martin DB9 68.1 mm 68.1mm → 67.1mm 35-45mm
2016 Aston Martin DB9 GT 68.1 mm 68.1mm → 67.1mm 35-45mm
2021 Aston Martin DBS Superleggera 68.1 mm 68.1mm → 67.1mm 35-45mm
2025 Aston Martin DBX 68.1 mm 68.1mm → 67.1mm 35-45mm
2018 Aston Martin Vanquish S 68.1 mm 68.1mm → 67.1mm 35-45mm
1993 Chrysler New Yorker 71.6 mm 71.6mm → 67.1mm 40
Looking for all models? View the complete directory of vehicles with 5x114.3 bolt pattern →

Quick Tips & Safety Warnings

Ready to upgrade or perform maintenance?

🛒 Shop Tools & Accessories on Amazon

As an Amazon Associate, I earn from qualifying purchases.

2026 MAZDA CX-30 — Frequently Asked Questions

What is the bolt pattern for a 2026 MAZDA CX-30?

The 2026 MAZDA CX-30 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45-50mm.

What other years of MAZDA CX-30 have the same bolt pattern as the 2026?

The MAZDA CX-30 uses the 5x114.3 pattern from 2020 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.

How do I measure the bolt pattern on my 2026 MAZDA?

The 2026 CX-30 uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.

Will wheels from another MAZDA fit my 2026 CX-30?

Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.

What is the center bore of a 2026 MAZDA CX-30?

The factory center bore (hub bore) for the 2026 MAZDA CX-30 is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.

Do 2026 MAZDA CX-30s use lug bolts or lug nuts?

The 2026 CX-30 requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.

For Tire & Wheel Shops, Shopify Stores & Developers

Running a Tire Shop or Wheel Store?

Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.

Get Master Spreadsheet (CSV) →
Confidence Level
Medium
Verified Source
Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last Updated
2026-11-18

MAZDA CX-30 By Year

2020 2021 2022 2023 2024 2025 2026

Other MAZDA Models

626 929 B-Series Cab Plus B-Series Extended Cab CX-30 CX-5 CX-50 CX-70 CX-9 CX-90 CX-90 PHEV MX-3 MX-30 MX-5 Miata MX-5 Miata RF Millenia Protege Protege5 RX-7 Tribute

Popular Vehicle Fitment

▶ Ford Mustang Specs ▶ Chevy Tahoe Specs ▶ Honda Civic Specs ▶ Ford F-150 Specs ▶ Toyota Camry Specs

Common Bolt Patterns

▶ 5x114.3 (5x4.5") ▶ 6x139.7 (6x5.5") ▶ 5x120 ▶ 5x127 (5x5") ▶ 5x112 (European)