2017 Ferrari F12berlinetta Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2017 Ferrari F12berlinetta, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 48 front, 72 rear |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2017 F12berlinetta — Year-Specific Fitment Context
The 2017 model year is the final year of the Ferrari F12berlinetta's 5x114.3 bolt pattern run (since 2013). Wheels from any 2013–2017 Ferrari F12berlinetta are cross-compatible with the 2017 model.
Ferrari F12berlinetta Bolt Pattern by Year
The table below shows how the F12berlinetta's wheel specifications have changed over the years. The 2017 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2017 Ferrari F12berlinetta
For the 2017 Ferrari F12berlinetta, the 5x114.3 bolt pattern and 67.1mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load transfer. Offset is highly sensitive: front wheels must be 48mm, rear 72mm. Deviations can cause rubbing or clearance issues with the wide fenders and brakes. Always use lug nuts with the correct thread pitch (14x1.50) and seat type—Ferrari uses a ball seat, not conical. Improper seating can lead to wheel loosening. Verify wheel load rating exceeds the vehicle's weight. For track use, consider titanium studs for durability.
Historical Fitment Data Reference
In our dataset, Ferrari F12berlinetta appears from 2013 to 2017 (5 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 24.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating, as wheel flex can cause loosening.
- ✅ When installing aftermarket wheels, always use hub-centric rings made of aluminum or plastic to match the 67.1mm bore; avoid steel rings that can corrode.
- ✅ Check brake caliper clearance: the F12's large brakes require wheels with specific spoke profiles; test fit before mounting tires.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2017 Ferrari F12berlinetta — Frequently Asked Questions
What is the bolt pattern for a 2017 Ferrari F12berlinetta?
The 2017 Ferrari F12berlinetta uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 48 front, 72 rearmm.
What other years of Ferrari F12berlinetta have the same bolt pattern as the 2017?
The Ferrari F12berlinetta uses the 5x114.3 pattern from 2013 through 2017. Wheels from any of these model years are dimensionally compatible with the 2017, provided the offset and center bore also match.
What does 48 front, 72 rearmm offset mean for the 2017 F12berlinetta?
An offset of 48 front, 72 rearmm means the wheel's mounting surface is 48 front, 72 rearmm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ferrari.
How do I measure the bolt pattern on my 2017 Ferrari?
The 2017 F12berlinetta uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Do 2017 Ferrari F12berlinettas use lug bolts or lug nuts?
The 2017 F12berlinetta requires B 14x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the center bore of a 2017 Ferrari F12berlinetta?
The factory center bore (hub bore) for the 2017 Ferrari F12berlinetta is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset