2016 Ferrari F12berlinetta Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2016 Ferrari F12berlinetta, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 5x114.3 (5x4.5")
Lug Nut / Bolt Size B 14x1.50
Center Bore (CB) 67.1 mm
Offset (ET) 48 front, 72 rear
Torque Specs 100 ft-lbs (135 Nm)

2016 F12berlinetta — Year-Specific Fitment Context

The 2016 Ferrari F12berlinetta is in year 4 of 5 using the 5x114.3 pattern (2013–2017). Wheels from any 2013–2017 Ferrari F12berlinetta are cross-compatible with the 2016 model.

Ferrari F12berlinetta Bolt Pattern by Year

The table below shows how the F12berlinetta's wheel specifications have changed over the years. The 2016 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2013 5x114.3 67.1 48 front, 72 rear
2014 5x114.3 67.1 48 front, 72 rear
2015 5x114.3 67.1 48 front, 72 rear
▸ 2016 5x114.3 67.1 48 front, 72 rear
2017 5x114.3 67.1 48 front, 72 rear

Fitment Notes

The 2016 Ferrari F12berlinetta has a bolt pattern of 5x114.3.

Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".

This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, Ferrari F12berlinetta appears from 2013 to 2017 (5 model years).

Across recorded model years, this model generally keeps the same bolt pattern.

5x114.3 Pattern Context

This bolt pattern appears on 2902 vehicles in our current database and is considered very common.

Examples of other vehicles using 5x114.3:

2016 Ferrari F12berlinetta — Frequently Asked Questions

What is the bolt pattern for a 2016 Ferrari F12berlinetta?

The 2016 Ferrari F12berlinetta uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 48 front, 72 rearmm.

What other years of Ferrari F12berlinetta have the same bolt pattern as the 2016?

The Ferrari F12berlinetta uses the 5x114.3 pattern from 2013 through 2017. Wheels from any of these model years are dimensionally compatible with the 2016, provided the offset and center bore also match.

Can I use spacers on my 2016 Ferrari F12berlinetta?

Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your B 14x1.50 hardware.

What is the PCD for a 2016 Ferrari F12berlinetta?

PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2016 F12berlinetta, the PCD is 5x114.3.

Can I put aftermarket wheels on my 2016 Ferrari F12berlinetta?

Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 48 front, 72 rearmm, and a center bore of at least 67.1mm (using hub rings if larger).

Do 2016 Ferrari F12berlinettas use lug bolts or lug nuts?

The 2016 F12berlinetta requires B 14x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

Ferrari F12berlinetta is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 2016 Ferrari F12berlinetta, please report it via our About page contact so we can verify and update this record.

Ferrari F12berlinetta By Year

2013 2014 2015 2016 2017

Other Ferrari Models

296 GTB 458 Italia 458 Speciale 488 Pista 488 Spider 599 GTB Fiorano 599 GTO 612 Scaglietti 812 Competizione 812 Competizione A 812 GTS 812 Superfast California F12berlinetta F430 F8 FF Portofino Roma SF90