2026 Kia EV9 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Kia EV9 is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of 35-45, and utilizes 12x1.5 (Flat seat, 21mm hex) fasteners tightened to 79-94 ft-lbs (107-127 Nm).
2026 Kia EV9 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 67.1 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 79-94 ft-lbs (107-127 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2026 EV9 — Year-Specific Fitment Context
The 2026 model year is the final year of the Kia EV9's 5x114.3 bolt pattern run (since 2024). Wheels from any 2024–2026 Kia EV9 are cross-compatible with the 2026 model.
Kia EV9 Bolt Pattern by Year
Looking for all generations? View the complete Kia EV9 (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the EV9's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Kia EV9 Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 Kia EV9, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 Lotus Emira | 67.1 mm (Exact) | 35-45 | 14x1.5 (Ball) |
| 2024 Maserati Ghibli | 67.1 mm (Exact) | 45 | 14x1.5 (Cone) |
| 2025 Maserati Grancabrio | 67.1 mm (Exact) | 35-45 | 14x1.5 (Ball) |
| 2025 Maserati GranTurismo | 67.1 mm (Exact) | 35-45 | 14x1.5 (Ball) |
| 2024 Maserati Levante | 67.1 mm (Exact) | 45 | 14x1.5 (Cone) |
| 2025 Maserati MC20 | 67.1 mm (Exact) | 35-45 | 14x1.5 (Ball) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 1994 Lincoln Continental | 70.3 mm | 70.3mm → 67.1mm |
40 |
| 1993 Lincoln Town Car | 70.3 mm | 70.3mm → 67.1mm |
10 |
| 2018 Lotus Evora 400 | 68.1 mm | 68.1mm → 67.1mm |
52 front, 69 rear |
| 2021 Lotus Evora GT | 68.0 mm | 68.0mm → 67.1mm |
50-60mm |
| 2021 Maserati Quattroporte | 78.1 mm | 78.1mm → 67.1mm |
45 |
| 1994 Mercury Grand Marquis | 70.5 mm | 70.5mm → 67.1mm |
0-40 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 79-94 ft-lbs (107-127 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Kia EV9 — Frequently Asked Questions
What is the bolt pattern for a 2026 Kia EV9?
The 2026 Kia EV9 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-45mm.
What other years of Kia EV9 have the same bolt pattern as the 2026?
The Kia EV9 uses the 5x114.3 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2026 Kia?
The 2026 EV9 uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Will wheels from another Kia fit my 2026 EV9?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
How tight should I torque the lug nuts on a 2026 Kia EV9?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What does 35-45mm offset mean for the 2026 EV9?
An offset of 35-45mm means the wheel's mounting surface is 35-45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Kia.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →