2025 Subaru Legacy Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Subaru Legacy is 5x114.3 (5x4.5"). It has a center bore of 56.1 mm, an offset range of 48-55, and utilizes 12x1.25 (Flat seat, 21mm hex) fasteners tightened to 89 ft-lbs (120 Nm).
2025 Subaru Legacy Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 56.1 mm |
| Offset Range (ET) | 48-55 |
| Thread Size (Lug Nut / Bolt) | 12x1.25 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 89 ft-lbs (120 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2025 Legacy — Year-Specific Fitment Context
The 2025 Subaru Legacy is in year 10 of 11 using the 5x114.3 pattern (2016–2026). Wheels from any 2016–2026 Subaru Legacy are cross-compatible with the 2025 model. Across its full production run (1992–2026), the Legacy has also used: 5x100.
Subaru Legacy Bolt Pattern by Year
Looking for all generations? View the complete Subaru Legacy (1992–2026) Bolt Pattern & Generation Guide →
The table below shows how the Legacy's wheel specifications have changed over the years. The 2025 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x100 | 56.1 | 55 |
| 1993 | 5x100 | 56.1 | 55 |
| 1994 | 5x100 | 56.1 | 55 |
| 1995 | 5x100 | 56.1 | 55 |
| 1996 | 5x100 | 56.1 | 55 |
| 1997 | 5x100 | 56.1 | 55 |
| 1998 | 5x100 | 56.1 | 55 |
| 1999 | 5x100 | 56.1 | 55 |
| 2000 | 5x100 | 56.1 | 55 |
| 2001 | 5x100 | 56.1 | 55 |
| 2002 | 5x100 | 56.1 | 55 |
| 2003 | 5x100 | 56.1 | 55 |
| 2004 | 5x100 | 56.1 | 55 |
| 2005 | 5x100 | 56.1 | 55 |
| 2006 | 5x100 | 56.1 | 55 |
| 2007 | 5x100 | 56.1 | 55 |
| 2008 | 5x100 | 56.1 | 55 |
| 2009 | 5x100 | 56.1 | 55 |
| 2010 | 5x100 | 56.1 | 55 |
| 2011 | 5x100 | 56.1 | 55 |
| 2012 | 5x100 | 56.1 | 55 |
| 2013 | 5x100 | 56.1 | 55 |
| 2014 | 5x100 | 56.1 | 55 |
| 2015 | 5x100 | 56.1 | 55 |
| 2016 | 5x114.3 | 56.1 | 55 |
| 2017 | 5x114.3 | 56.1 | 55 |
| 2018 | 5x114.3 | 56.1 | 55 |
| 2019 | 5x114.3 | 56.1 | 55 |
| 2020 | 5x114.3 | 56.1 | 55 |
| 2021 | 5x114.3 | 56.1 | 55 |
| 2022 | 5x114.3 | 56.1 | 55 |
| 2023 | 5x114.3 | 56.1 | 55 |
| 2024 | 5x114.3 | 56.1 | 55 |
| ▸ 2025 | 5x114.3 | 56.1 | 48-55 |
| 2026 | 5x114.3 | 56.1 | 48-55 |
2025 Subaru Legacy Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2025 Subaru Legacy, donor rims must match the 5x114.3 PCD and have a center bore of at least 56.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 56.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 Subaru Ascent | 56.1 mm (Exact) | 45-55 | 12x1.25 (Flat) |
| 2024 Subaru Crosstrek | 56.1 mm (Exact) | 48 | 12x1.25 (Cone) |
| 2019 Subaru Forester | 56.1 mm (Exact) | 55 | 12x1.25 (Cone) |
| 2024 Subaru Impreza | 56.1 mm (Exact) | 48 | 12x1.25 (Cone) |
| 2016 Subaru Outback | 56.1 mm (Exact) | 55 | N 12x1.25 (Cone) |
| 2025 Subaru WRX | 56.1 mm (Exact) | 45-55 | 12x1.25 (Flat) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2025 McLaren Artura | 67.1 mm | 67.1mm → 56.1mm |
Front: +55mm, Rear: +60mm |
| 2025 McLaren GTS | 67.1 mm | 67.1mm → 56.1mm |
Front: +55mm, Rear: +48mm |
| 1994 Mercury Grand Marquis | 70.5 mm | 70.5mm → 56.1mm |
0-40 |
| 2003 Mercury Sable | 70.5 mm | 70.5mm → 56.1mm |
40 |
| 2025 Mitsubishi Eclipse Cross | 67.1 mm | 67.1mm → 56.1mm |
40-46 |
| 2006 Mitsubishi Galant | 67.1 mm | 67.1mm → 56.1mm |
38-46 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 89 ft-lbs (120 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Subaru Legacy — Frequently Asked Questions
What is the bolt pattern for a 2025 Subaru Legacy?
The 2025 Subaru Legacy uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 48-55mm.
What other years of Subaru Legacy have the same bolt pattern as the 2025?
The Subaru Legacy uses the 5x114.3 pattern from 2016 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
Can I use spacers on my 2025 Subaru Legacy?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 56.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
What is the center bore of a 2025 Subaru Legacy?
The factory center bore (hub bore) for the 2025 Subaru Legacy is 56.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the PCD for a 2025 Subaru Legacy?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2025 Legacy, the PCD is 5x114.3.
Will wheels from another Subaru fit my 2025 Legacy?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 56.1mm.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →