2008 Subaru Legacy Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Subaru Legacy, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 55 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2008 Legacy — Year-Specific Fitment Context
The 2008 Subaru Legacy is in year 17 of 24 using the 5x100 pattern (1992–2015). Wheels from any 1992–2015 Subaru Legacy are cross-compatible with the 2008 model. Across its full production run (1992–2024), the Legacy has also used: 5x114.3.
Subaru Legacy Bolt Pattern by Year
The table below shows how the Legacy's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x100 | 56.1 | 55 |
| 1993 | 5x100 | 56.1 | 55 |
| 1994 | 5x100 | 56.1 | 55 |
| 1995 | 5x100 | 56.1 | 55 |
| 1996 | 5x100 | 56.1 | 55 |
| 1997 | 5x100 | 56.1 | 55 |
| 1998 | 5x100 | 56.1 | 55 |
| 1999 | 5x100 | 56.1 | 55 |
| 2000 | 5x100 | 56.1 | 55 |
| 2001 | 5x100 | 56.1 | 55 |
| 2002 | 5x100 | 56.1 | 55 |
| 2003 | 5x100 | 56.1 | 55 |
| 2004 | 5x100 | 56.1 | 55 |
| 2005 | 5x100 | 56.1 | 55 |
| 2006 | 5x100 | 56.1 | 55 |
| 2007 | 5x100 | 56.1 | 55 |
| ▸ 2008 | 5x100 | 56.1 | 55 |
| 2009 | 5x100 | 56.1 | 55 |
| 2010 | 5x100 | 56.1 | 55 |
| 2011 | 5x100 | 56.1 | 55 |
| 2012 | 5x100 | 56.1 | 55 |
| 2013 | 5x100 | 56.1 | 55 |
| 2014 | 5x100 | 56.1 | 55 |
| 2015 | 5x100 | 56.1 | 55 |
| 2016 | 5x114.3 | 56.1 | 55 |
| 2017 | 5x114.3 | 56.1 | 55 |
| 2018 | 5x114.3 | 56.1 | 55 |
| 2019 | 5x114.3 | 56.1 | 55 |
| 2020 | 5x114.3 | 56.1 | 55 |
| 2021 | 5x114.3 | 56.1 | 55 |
| 2022 | 5x114.3 | 56.1 | 55 |
| 2023 | 5x114.3 | 56.1 | 55 |
| 2024 | 5x114.3 | 56.1 | 55 |
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
Expert Buying Guide for 2008 Subaru Legacy
For your 2008 Subaru Legacy, the bolt pattern is 5x100 with a center bore of 56.1mm. When selecting aftermarket wheels, ensure they have a center bore of at least 56.1mm; if larger, use hub-centric rings to prevent vibration and ensure proper load transfer. The offset is critical: stock is 55mm. A lower offset (e.g., 35-45mm) pushes wheels outward, risking fender rub and increased bearing wear. Always match lug nut thread pitch (12x1.25) and seat type (cone or ball) to the wheel. Improper lug nuts can cause wheel loosening. Re-torque after 50-100 miles. Note: 1992-2015 Legacy wheels are direct fit.
Historical Fitment Data Reference
In our dataset, Subaru Legacy appears from 1992 to 2024 (33 model years). Across model years, this model appears with 2 bolt patterns (5x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheels have a larger center bore than 56.1mm to avoid vibrations.
- ✅ Stick to offsets between 48-55mm to maintain proper suspension geometry and avoid rubbing.
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving to ensure proper seating.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Subaru Legacy — Frequently Asked Questions
What is the bolt pattern for a 2008 Subaru Legacy?
The 2008 Subaru Legacy uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 55mm.
What other years of Subaru Legacy have the same bolt pattern as the 2008?
The Subaru Legacy uses the 5x100 pattern from 1992 through 2015. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2008 Subaru Legacy?
Absolutely. Just ensure the aftermarket wheels have a 5x100 bolt pattern, an offset near 55mm, and a center bore of at least 56.1mm (using hub rings if larger).
What is the PCD for a 2008 Subaru Legacy?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2008 Legacy, the PCD is 5x100.
What is the factory wheel offset for a 2008 Subaru Legacy?
The OEM offset for the 2008 Legacy is typically around 55mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 2008 Subaru Legacy?
Yes, but ensure the wheel spacers match the 5x100 bolt pattern and 56.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.25 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset