2010 Subaru Legacy Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Subaru Legacy, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 55 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2010 Legacy — Year-Specific Fitment Context
The 2010 Subaru Legacy is in year 19 of 24 using the 5x100 pattern (1992–2015). Wheels from any 1992–2015 Subaru Legacy are cross-compatible with the 2010 model. Across its full production run (1992–2024), the Legacy has also used: 5x114.3.
Subaru Legacy Bolt Pattern by Year
The table below shows how the Legacy's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x100 | 56.1 | 55 |
| 1993 | 5x100 | 56.1 | 55 |
| 1994 | 5x100 | 56.1 | 55 |
| 1995 | 5x100 | 56.1 | 55 |
| 1996 | 5x100 | 56.1 | 55 |
| 1997 | 5x100 | 56.1 | 55 |
| 1998 | 5x100 | 56.1 | 55 |
| 1999 | 5x100 | 56.1 | 55 |
| 2000 | 5x100 | 56.1 | 55 |
| 2001 | 5x100 | 56.1 | 55 |
| 2002 | 5x100 | 56.1 | 55 |
| 2003 | 5x100 | 56.1 | 55 |
| 2004 | 5x100 | 56.1 | 55 |
| 2005 | 5x100 | 56.1 | 55 |
| 2006 | 5x100 | 56.1 | 55 |
| 2007 | 5x100 | 56.1 | 55 |
| 2008 | 5x100 | 56.1 | 55 |
| 2009 | 5x100 | 56.1 | 55 |
| ▸ 2010 | 5x100 | 56.1 | 55 |
| 2011 | 5x100 | 56.1 | 55 |
| 2012 | 5x100 | 56.1 | 55 |
| 2013 | 5x100 | 56.1 | 55 |
| 2014 | 5x100 | 56.1 | 55 |
| 2015 | 5x100 | 56.1 | 55 |
| 2016 | 5x114.3 | 56.1 | 55 |
| 2017 | 5x114.3 | 56.1 | 55 |
| 2018 | 5x114.3 | 56.1 | 55 |
| 2019 | 5x114.3 | 56.1 | 55 |
| 2020 | 5x114.3 | 56.1 | 55 |
| 2021 | 5x114.3 | 56.1 | 55 |
| 2022 | 5x114.3 | 56.1 | 55 |
| 2023 | 5x114.3 | 56.1 | 55 |
| 2024 | 5x114.3 | 56.1 | 55 |
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
Expert Buying Guide for 2010 Subaru Legacy
The 2010 Subaru Legacy uses a 5x100 bolt pattern with a 56.1mm center bore and 55mm offset. When selecting aftermarket wheels, hub-centric rings are mandatory to ensure proper load distribution and prevent vibrations, as the bore must match the hub exactly. The offset is sensitive; staying within ±5mm of 55mm is recommended to avoid rubbing or clearance issues with suspension and brakes. Always verify lug nut thread pitch (12x1.25) and seat type—use conical (60-degree) or ball-seat lug nuts as specified by the wheel manufacturer. Incorrect lug nuts can lead to wheel loosening. For cross-compatibility, wheels from 1992–2015 Subaru Legacy models fit directly.
Historical Fitment Data Reference
In our dataset, Subaru Legacy appears from 1992 to 2024 (33 model years). Across model years, this model appears with 2 bolt patterns (5x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a larger center bore without hub-centric rings; vibrations and stress on studs may occur.
- ✅ Check for clearance with the front brake calipers, as some aftermarket wheels may require spacers.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Subaru Legacy — Frequently Asked Questions
What is the bolt pattern for a 2010 Subaru Legacy?
The 2010 Subaru Legacy uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 55mm.
What other years of Subaru Legacy have the same bolt pattern as the 2010?
The Subaru Legacy uses the 5x100 pattern from 1992 through 2015. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2010 Subaru Legacy?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2010 Subaru?
The 2010 Legacy uses a 5x100 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Why is matching the 56.1mm center bore important for the 2010 Legacy?
The 56.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the center bore of a 2010 Subaru Legacy?
The factory center bore (hub bore) for the 2010 Subaru Legacy is 56.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset