2012 Suzuki Equator Crew Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2012 Suzuki Equator Crew Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x114.3 |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 30 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2012 Equator Crew Cab — Year-Specific Fitment Context
The 2012 model year is the final year of the Suzuki Equator Crew Cab's 6x114.3 bolt pattern run (since 2009). Wheels from any 2009–2012 Suzuki Equator Crew Cab are cross-compatible with the 2012 model.
Suzuki Equator Crew Cab Bolt Pattern by Year
The table below shows how the Equator Crew Cab's wheel specifications have changed over the years. The 2012 model year is highlighted.
Fitment Notes
The 2012 Suzuki Equator Crew Cab has a bolt pattern of 6x114.3.
This means it is a 6 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Suzuki Equator Crew Cab appears from 2009 to 2012 (4 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
6x114.3 Pattern Context
This bolt pattern appears on 138 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x114.3:
2012 Suzuki Equator Crew Cab — Frequently Asked Questions
What is the bolt pattern for a 2012 Suzuki Equator Crew Cab?
The 2012 Suzuki Equator Crew Cab uses a 6x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 30mm.
What other years of Suzuki Equator Crew Cab have the same bolt pattern as the 2012?
The Suzuki Equator Crew Cab uses the 6x114.3 pattern from 2009 through 2012. Wheels from any of these model years are dimensionally compatible with the 2012, provided the offset and center bore also match.
What is the PCD for a 2012 Suzuki Equator Crew Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2012 Equator Crew Cab, the PCD is 6x114.3.
What is the factory wheel offset for a 2012 Suzuki Equator Crew Cab?
The OEM offset for the 2012 Equator Crew Cab is typically around 30mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 2012 Suzuki?
The 2012 Equator Crew Cab uses a 6x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Do 2012 Suzuki Equator Crew Cabs use lug bolts or lug nuts?
The 2012 Equator Crew Cab requires 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Suzuki Equator Crew Cab is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2009-2012 (4 model years).
- Observed bolt-pattern variants: 1 (6x114.3).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2012 Suzuki Equator Crew Cab, please report it via our About page contact so we can verify and update this record.