2012 Suzuki Equator Extended Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2012 Suzuki Equator Extended Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x114.3 |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 30 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2012 Equator Extended Cab — Year-Specific Fitment Context
The 2012 model year is the final year of the Suzuki Equator Extended Cab's 6x114.3 bolt pattern run (since 2009). Wheels from any 2009–2012 Suzuki Equator Extended Cab are cross-compatible with the 2012 model.
Suzuki Equator Extended Cab Bolt Pattern by Year
The table below shows how the Equator Extended Cab's wheel specifications have changed over the years. The 2012 model year is highlighted.
6x114.3 Pattern Context
This bolt pattern appears on 138 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x114.3:
Expert Buying Guide for 2012 Suzuki Equator Extended Cab
For your 2012 Suzuki Equator Extended Cab, the 6x114.3 bolt pattern is shared with many Nissan Frontier models (2009-2012). The 66.1mm center bore is critical: aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive; the factory 30mm offset is ideal for suspension geometry and brake clearance. Deviating more than ±10mm may cause rubbing or bearing stress. Always use lug nuts with the correct 12x1.25 thread pitch and a 60-degree conical seat (factory spec). Avoid ball-seat or shank-style nuts, as they can loosen or damage the wheel. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Suzuki Equator Extended Cab appears from 2009 to 2012 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 85-95 ft-lbs after 50-100 miles of driving to account for wheel seating.
- ✅ If using aftermarket wheels, verify that the hub-centric rings are made of metal (not plastic) for durability and heat resistance.
- ✅ Avoid spacers wider than 5mm without extended studs; the factory studs are short and may not provide enough thread engagement.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2012 Suzuki Equator Extended Cab — Frequently Asked Questions
What is the bolt pattern for a 2012 Suzuki Equator Extended Cab?
The 2012 Suzuki Equator Extended Cab uses a 6x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 30mm.
What other years of Suzuki Equator Extended Cab have the same bolt pattern as the 2012?
The Suzuki Equator Extended Cab uses the 6x114.3 pattern from 2009 through 2012. Wheels from any of these model years are dimensionally compatible with the 2012, provided the offset and center bore also match.
What lug nut size does the 2012 Suzuki Equator Extended Cab use?
The 2012 Suzuki Equator Extended Cab uses 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I use spacers on my 2012 Suzuki Equator Extended Cab?
Yes, but ensure the wheel spacers match the 6x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
How do I measure the bolt pattern on my 2012 Suzuki?
The 2012 Equator Extended Cab uses a 6x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the factory wheel offset for a 2012 Suzuki Equator Extended Cab?
The OEM offset for the 2012 Equator Extended Cab is typically around 30mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset