1997 Suzuki X-90 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1997 Suzuki X-90, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x139.7 (5x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 108.1 mm |
| Offset (ET) | 25 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1997 X-90 — Year-Specific Fitment Context
The 1997 Suzuki X-90 is in year 2 of 3 using the 5x139.7 pattern (1996–1998). Wheels from any 1996–1998 Suzuki X-90 are cross-compatible with the 1997 model.
Suzuki X-90 Bolt Pattern by Year
The table below shows how the X-90's wheel specifications have changed over the years. The 1997 model year is highlighted.
Fitment Notes
The 1997 Suzuki X-90 has a bolt pattern of 5x139.7.
Imperial Conversion: This bolt pattern is commonly referred to as 5x5.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x5.5".
This means it is a 5 lug pattern with a circle diameter of 139.7mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Suzuki X-90 appears from 1996 to 1998 (3 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x139.7 Pattern Context
This bolt pattern appears on 261 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x139.7:
1997 Suzuki X-90 — Frequently Asked Questions
What is the bolt pattern for a 1997 Suzuki X-90?
The 1997 Suzuki X-90 uses a 5x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 108.1mm and the offset is 25mm.
What other years of Suzuki X-90 have the same bolt pattern as the 1997?
The Suzuki X-90 uses the 5x139.7 pattern from 1996 through 1998. Wheels from any of these model years are dimensionally compatible with the 1997, provided the offset and center bore also match.
Will wheels from another Suzuki fit my 1997 X-90?
Only if they share the exact same 5x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 108.1mm.
What lug nut size does the 1997 Suzuki X-90 use?
The 1997 Suzuki X-90 uses 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Why is matching the 108.1mm center bore important for the 1997 X-90?
The 108.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What does 25mm offset mean for the 1997 X-90?
An offset of 25mm means the wheel's mounting surface is 25mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Suzuki.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Suzuki X-90 is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1996-1998 (3 model years).
- Observed bolt-pattern variants: 1 (5x139.7).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1997 Suzuki X-90, please report it via our About page contact so we can verify and update this record.