2004 Suzuki XL-7 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2004 Suzuki XL-7, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x139.7 (5x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 108.1 mm |
| Offset (ET) | 25 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2004 XL-7 — Year-Specific Fitment Context
The 2004 Suzuki XL-7 is in year 4 of 6 using the 5x139.7 pattern (2001–2006). Wheels from any 2001–2006 Suzuki XL-7 are cross-compatible with the 2004 model.
Suzuki XL-7 Bolt Pattern by Year
The table below shows how the XL-7's wheel specifications have changed over the years. The 2004 model year is highlighted.
Fitment Notes
The 2004 Suzuki XL-7 has a bolt pattern of 5x139.7.
Imperial Conversion: This bolt pattern is commonly referred to as 5x5.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x5.5".
This means it is a 5 lug pattern with a circle diameter of 139.7mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Suzuki XL-7 appears from 2001 to 2006 (6 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x139.7 Pattern Context
This bolt pattern appears on 261 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x139.7:
2004 Suzuki XL-7 — Frequently Asked Questions
What is the bolt pattern for a 2004 Suzuki XL-7?
The 2004 Suzuki XL-7 uses a 5x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 108.1mm and the offset is 25mm.
What other years of Suzuki XL-7 have the same bolt pattern as the 2004?
The Suzuki XL-7 uses the 5x139.7 pattern from 2001 through 2006. Wheels from any of these model years are dimensionally compatible with the 2004, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2004 Suzuki?
The 2004 XL-7 uses a 5x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the factory wheel offset for a 2004 Suzuki XL-7?
The OEM offset for the 2004 XL-7 is typically around 25mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I put aftermarket wheels on my 2004 Suzuki XL-7?
Absolutely. Just ensure the aftermarket wheels have a 5x139.7 bolt pattern, an offset near 25mm, and a center bore of at least 108.1mm (using hub rings if larger).
What does 25mm offset mean for the 2004 XL-7?
An offset of 25mm means the wheel's mounting surface is 25mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Suzuki.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Suzuki XL-7 is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2001-2006 (6 model years).
- Observed bolt-pattern variants: 1 (5x139.7).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2004 Suzuki XL-7, please report it via our About page contact so we can verify and update this record.