2026 Tesla Model S Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Tesla Model S is 5x120. It has a center bore of 64.1 mm, an offset range of 35-40, and utilizes 14x1.5 (Cone seat, 21mm hex) fasteners tightened to 129 ft-lbs (175 Nm).
2026 Tesla Model S Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x120 |
|---|---|
| Center Bore (Hub Bore) | 64.1 mm |
| Offset Range (ET) | 35-40 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 129 ft-lbs (175 Nm) |
2026 Model S — Year-Specific Fitment Context
The 2026 model year is the final year of the Tesla Model S's 5x120 bolt pattern run (since 2012). Wheels from any 2012–2026 Tesla Model S are cross-compatible with the 2026 model.
Tesla Model S Bolt Pattern by Year
Looking for all generations? View the complete Tesla Model S (2012–2026) Bolt Pattern & Generation Guide →
The table below shows how the Model S's wheel specifications have changed over the years. The 2026 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2012 | 5x120 | 64.1 | 40 |
| 2013 | 5x120 | 64.1 | 40 |
| 2014 | 5x120 | 64.1 | 40 |
| 2015 | 5x120 | 64.1 | 40 |
| 2016 | 5x120 | 64.1 | 40 |
| 2017 | 5x120 | 64.1 | 40 |
| 2018 | 5x120 | 64.1 | 40 |
| 2019 | 5x120 | 64.1 | 40 |
| 2020 | 5x120 | 64.1 | 40 |
| 2021 | 5x120 | 64.1 | 40 |
| 2022 | 5x120 | 64.1 | 40 |
| 2023 | 5x120 | 64.1 | 40 |
| 2024 | 5x120 | 64.1 | 40 |
| 2025 | 5x120 | 64.1 | 35-40 |
| ▸ 2026 | 5x120 | 64.1 | 35-40 |
2026 Tesla Model S Wheel Interchange & Donor Fitment Guide (5x120)
The 5x120 bolt pattern is shared by 641 vehicles in our database (common). For safe wheel swaps on the 2026 Tesla Model S, donor rims must match the 5x120 PCD and have a center bore of at least 64.1 mm:
DIRECT HUB MATCH Same 5x120 Pattern & Exact 64.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2018 Honda Odyssey | 64.1 mm (Exact) | 55 | 14x1.5 (Ball) |
| 2019 Honda Passport | 64.1 mm (Exact) | 55 | 14x1.5 (Ball) |
| 2009 Honda Pilot | 64.1 mm (Exact) | 45 | 14x1.5 (Ball) |
| 2024 Honda Ridgeline | 64.1 mm (Exact) | 55 | 14x1.5 (Ball) |
| 2024 Lucid Air | 64.1 mm (Exact) | 40 | 14x1.5 (Ball) |
| 2025 Tesla Model X | 64.1 mm (Exact) | 35-45 | 14x1.5 (Cone) |
HUB RING FITMENT Same 5x120 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2018 BMW X5 M | 72.56 mm | 72.56mm → 64.1mm |
30-40 |
| 2018 BMW X6 | 72.56 mm | 72.56mm → 64.1mm |
30-40 |
| 2018 BMW X6 M | 72.56 mm | 72.56mm → 64.1mm |
30-40 |
| 2008 BMW Z4 M | 72.6 mm | 72.6mm → 64.1mm |
30 front, 40 rear |
| 2011 Buick LaCrosse | 67.1 mm | 67.1mm → 64.1mm |
45 |
| 2011 Buick Regal | 67.1 mm | 67.1mm → 64.1mm |
42 |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x120 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 129 ft-lbs (175 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Tesla Model S — Frequently Asked Questions
What is the bolt pattern for a 2026 Tesla Model S?
The 2026 Tesla Model S uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 35-40mm.
What other years of Tesla Model S have the same bolt pattern as the 2026?
The Tesla Model S uses the 5x120 pattern from 2012 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
What is the PCD for a 2026 Tesla Model S?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2026 Model S, the PCD is 5x120.
How tight should I torque the lug nuts on a 2026 Tesla Model S?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I use spacers on my 2026 Tesla Model S?
Yes, but ensure the wheel spacers match the 5x120 bolt pattern and 64.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Can I put aftermarket wheels on my 2026 Tesla Model S?
Absolutely. Just ensure the aftermarket wheels have a 5x120 bolt pattern, an offset near 35-40mm, and a center bore of at least 64.1mm (using hub rings if larger).
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →