2026 Toyota GR Corolla Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Toyota GR Corolla is 5x114.3 (5x4.5"). It has a center bore of 60.1 mm, an offset range of 35-45, and utilizes 14x1.5 (Flat seat, 21mm hex) fasteners tightened to 76 ft-lbs (103 Nm).
2026 Toyota GR Corolla Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 60.1 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 76 ft-lbs (103 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2026 GR Corolla — Year-Specific Fitment Context
The 2026 model year is the final year of the Toyota GR Corolla's 5x114.3 bolt pattern run (since 2024). Wheels from any 2024–2026 Toyota GR Corolla are cross-compatible with the 2026 model.
Toyota GR Corolla Bolt Pattern by Year
Looking for all generations? View the complete Toyota GR Corolla (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the GR Corolla's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Toyota GR Corolla Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 Toyota GR Corolla, donor rims must match the 5x114.3 PCD and have a center bore of at least 60.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 60.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 Lexus ES | 60.1 mm (Exact) | 40 | 12x1.5 (Flat) |
| 2020 Lexus GS | 60.1 mm (Exact) | 35-45 | 14x1.5 (Flat/Mag) |
| 2007 Lexus GX | 60.1 mm (Exact) | 25 | N 12x1.50 (Flat/Mag) |
| 2025 Lexus IS | 60.1 mm (Exact) | 35-45 | 12x1.5 (Flat) |
| 2025 Lexus NX | 60.1 mm (Exact) | 35-45 | 14x1.5 (Flat) |
| 2025 Lexus RC | 60.1 mm (Exact) | 35-45 | 12x1.5 (Flat) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2026 Hyundai Tucson Hybrid | 67.1 mm | 67.1mm → 60.1mm |
35-50 |
| 2025 Hyundai Tucson Plug-in Hybrid | 67.1 mm | 67.1mm → 60.1mm |
35-50 |
| 2022 Hyundai Veloster | 67.1 mm | 67.1mm → 60.1mm |
35-50 |
| 2025 Hyundai Venue | 67.1 mm | 67.1mm → 60.1mm |
45-50 |
| 2015 INFINITI Q40 | 66.1 mm | 66.1mm → 60.1mm |
40 |
| 2024 INFINITI Q50 | 66.1 mm | 66.1mm → 60.1mm |
40-50 |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 76 ft-lbs (103 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Toyota GR Corolla — Frequently Asked Questions
What is the bolt pattern for a 2026 Toyota GR Corolla?
The 2026 Toyota GR Corolla uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 35-45mm.
What other years of Toyota GR Corolla have the same bolt pattern as the 2026?
The Toyota GR Corolla uses the 5x114.3 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2026 Toyota GR Corolla?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Why is matching the 60.1mm center bore important for the 2026 GR Corolla?
The 60.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the PCD for a 2026 Toyota GR Corolla?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2026 GR Corolla, the PCD is 5x114.3.
Can I put aftermarket wheels on my 2026 Toyota GR Corolla?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-45mm, and a center bore of at least 60.1mm (using hub rings if larger).
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →