2016 Toyota Prius c Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2016 Toyota Prius c, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2016 Prius c — Year-Specific Fitment Context
The 2016 Toyota Prius c is in year 2 of 5 using the 5x114.3 pattern (2015–2019). Wheels from any 2015–2019 Toyota Prius c are cross-compatible with the 2016 model. Across its full production run (2012–2019), the Prius c has also used: 5x100.
Toyota Prius c Bolt Pattern by Year
The table below shows how the Prius c's wheel specifications have changed over the years. The 2016 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2016 Toyota Prius c
For the 2016 Toyota Prius c, the bolt pattern is 5x114.3 with a center bore of 60.1mm. When selecting aftermarket wheels, hub-centric rings are essential to match the bore precisely, preventing vibrations and ensuring proper load distribution. The factory offset is 45mm; deviations beyond ±5mm may cause rubbing or clearance issues with suspension and brake components. Always use lug nuts with the correct thread pitch (12x1.50) and seat type—either conical (60-degree) or ball seat—as specified by the wheel manufacturer. Mismatched lug nuts can lead to wheel loosening or damage. Verify that aftermarket wheels are hub-centric or use rings, and re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Toyota Prius c appears from 2012 to 2019 (8 model years). Across model years, this model appears with 2 bolt patterns (5x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 1.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 76 ft-lbs after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a center bore larger than 60.1mm without hub-centric rings to prevent vibration.
- ✅ Check for brake caliper clearance when using wheels with offset below 40mm, as the Prius c has tight tolerances.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2016 Toyota Prius c — Frequently Asked Questions
What is the bolt pattern for a 2016 Toyota Prius c?
The 2016 Toyota Prius c uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 45mm.
What other years of Toyota Prius c have the same bolt pattern as the 2016?
The Toyota Prius c uses the 5x114.3 pattern from 2015 through 2019. Wheels from any of these model years are dimensionally compatible with the 2016, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2016 Toyota?
The 2016 Prius c uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Will wheels from another Toyota fit my 2016 Prius c?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 60.1mm.
What is the PCD for a 2016 Toyota Prius c?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2016 Prius c, the PCD is 5x114.3.
Do 2016 Toyota Prius cs use lug bolts or lug nuts?
The 2016 Prius c requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset