2026 Toyota Prius Prime (PHEV) Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Toyota Prius Prime (PHEV) is 5x114.3 (5x4.5"). It has a center bore of 60.1 mm, an offset range of 40, and utilizes 12x1.5 (Flat seat, 21mm hex) fasteners tightened to 76 ft-lbs (103 Nm).
2026 Toyota Prius Prime (PHEV) Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 60.1 mm |
| Offset Range (ET) | 40 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 76 ft-lbs (103 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2026 Prius Prime (PHEV) — Year-Specific Fitment Context
The 2026 model year is the final year of the Toyota Prius Prime (PHEV)'s 5x114.3 bolt pattern run (since 2024). Wheels from any 2024–2026 Toyota Prius Prime (PHEV) are cross-compatible with the 2026 model.
Toyota Prius Prime (PHEV) Bolt Pattern by Year
Looking for all generations? View the complete Toyota Prius Prime (PHEV) (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the Prius Prime (PHEV)'s wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Toyota Prius Prime (PHEV) Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 Toyota Prius Prime (PHEV), donor rims must match the 5x114.3 PCD and have a center bore of at least 60.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 60.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2024 Ram 1000 | 60.1 mm (Exact) | 40 | 12x1.5 (Flat) |
| 2008 Saturn VUE | 60.1 mm (Exact) | 40 | 12x1.5 (Cone) |
| 2016 Scion iM | 60.1 mm (Exact) | 35-45mm | M12x1.5 (Cone) |
| 2011 Scion tC | 60.1 mm (Exact) | 39 | 12x1.5 (Cone) |
| 2008 Scion xB | 60.1 mm (Exact) | 45 | 12x1.5 (Cone) |
| 2025 Subaru Solterra | 60.1 mm (Exact) | 40 | 12x1.5 (Flat) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2021 MAZDA CX-3 | 67.1 mm | 67.1mm → 60.1mm |
45-50 |
| 2025 MAZDA CX-30 | 67.1 mm | 67.1mm → 60.1mm |
45-50 |
| 2025 MAZDA CX-5 | 67.1 mm | 67.1mm → 60.1mm |
35-45 |
| 2025 MAZDA CX-50 | 67.1 mm | 67.1mm → 60.1mm |
35-45 |
| 2025 MAZDA CX-70 | 67.1 mm | 67.1mm → 60.1mm |
35-45 |
| 2023 MAZDA CX-9 | 67.1 mm | 67.1mm → 60.1mm |
45-50 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 76 ft-lbs (103 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Toyota Prius Prime (PHEV) — Frequently Asked Questions
What is the bolt pattern for a 2026 Toyota Prius Prime (PHEV)?
The 2026 Toyota Prius Prime (PHEV) uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 40mm.
What other years of Toyota Prius Prime (PHEV) have the same bolt pattern as the 2026?
The Toyota Prius Prime (PHEV) uses the 5x114.3 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
Will wheels from another Toyota fit my 2026 Prius Prime (PHEV)?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 60.1mm.
What does 40mm offset mean for the 2026 Prius Prime (PHEV)?
An offset of 40mm means the wheel's mounting surface is 40mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Toyota.
Do 2026 Toyota Prius Prime (PHEV)s use lug bolts or lug nuts?
The 2026 Prius Prime (PHEV) requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I put aftermarket wheels on my 2026 Toyota Prius Prime (PHEV)?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 40mm, and a center bore of at least 60.1mm (using hub rings if larger).
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →